target/linux/ath79/dts/ar9344_pcs_cr5000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CR5000";
  11         compatible = "pcs,cr5000", "qca,ar9344";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &status;
  16                 led-failsafe = &status;
  17                 led-running = &status;
  18                 led-upgrade = &status;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 poll-interval = <20>;
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&jtag_disable_pins>;
  27
  28                 reset {
  29                         label = "Reset button";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 wps {
  36                         label = "WPS button";
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 status: power {
  47                         label = "pcs:amber:power";
  48                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>,
  49                                 <&gpio 4 GPIO_ACTIVE_LOW>;
  50                         default-state = "on";
  51                 };
  52
  53                 wlan2g {
  54                         label = "pcs:blue:wlan";
  55                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  56                         linux,default-trigger = "phy0tpt";
  57                 };
  58
  59                 wps_white {
  60                         label = "pcs:white:wps";
  61                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  62                 };
  63         };
  64 };
  65
  66 &ref {
  67         clock-frequency = <25000000>;
  68 };
  69
  70 &uart {
  71         status = "okay";
  72 };
  73
  74 &gpio {
  75         status = "okay";
  76 };
  77
  78 &spi {
  79         num-cs = <1>;
  80
  81         status = "okay";
  82
  83         flash@0 {
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 spi-max-frequency = <25000000>;
  87
  88                 partitions {
  89                         compatible = "fixed-partitions";
  90                         #address-cells = <1>;
  91                         #size-cells = <1>;
  92
  93                         uboot: partition@0 {
  94                                 label = "u-boot";
  95                                 reg = <0x000000 0x040000>;
  96                                 read-only;
  97                         };
  98
  99                         partition@40000 {
 100                                 label = "u-boot-env";
 101                                 reg = <0x040000 0x010000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@50000 {
 106                                 compatible = "denx,uimage";
 107                                 label = "firmware";
 108                                 reg = <0x050000 0x07a0000>;
 109                         };
 110
 111                         art: partition@7f0000 {
 112                                 label = "art";
 113                                 reg = <0x7f0000 0x010000>;
 114                                 read-only;
 115                         };
 116                 };
 117         };
 118 };
 119
 120 &usb {
 121         status = "okay";
 122         #address-cells = <1>;
 123         #size-cells = <0>;
 124
 125         hub_port1: port@1 {
 126                 reg = <1>;
 127                 #trigger-source-cells = <0>;
 128         };
 129 };
 130
 131 &usb_phy {
 132         status = "okay";
 133 };
 134
 135 &pcie {
 136         status = "okay";
 137
 138         ath9k: wifi@0,0 {
 139                 compatible = "pci168c,0030";
 140                 reg = <0x0000 0 0 0 0>;
 141                 mtd-mac-address = <&art 0x5002>;
 142                 #gpio-cells = <2>;
 143                 gpio-controller;
 144         };
 145 };
 146
 147 &mdio0 {
 148         status = "okay";
 149
 150         phy-mask = <0>;
 151
 152         phy0: ethernet-phy@0 {
 153                 reg = <0>;
 154                 phy-mode = "rgmii";
 155                 qca,ar8327-initvals = <
 156                         0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 157                         0x10 0x81000080 /* POWER_ON_STRAP */
 158                         0x50 0xcc35cc35 /* LED_CTRL0 */
 159                         0x54 0xca35ca35 /* LED_CTRL1 */
 160                         0x58 0xc935c935 /* LED_CTRL2 */
 161                         0x5c 0x03ffff00 /* LED_CTRL3 */
 162                         0x7c 0x0000007e /* PORT0_STATUS */
 163                 >;
 164         };
 165 };
 166
 167 &eth0 {
 168         #address-cells = <1>;
 169         #size-cells = <0>;
 170         status = "okay";
 171
 172         /* default for ar934x, except for 1000M */
 173         pll-data = <0x06000000 0x00000101 0x00001616>;
 174
 175         mtd-mac-address = <&art 0x0>;
 176
 177         phy-mode = "rgmii";
 178         phy-handle = <&phy0>;
 179
 180
 181         aliases {
 182                 ag0 = &eth1;
 183         };
 184
 185         port@0 {
 186                 compatible = "swconfig,port";
 187                 reg = <0>;
 188                 swconfig,segment = "lan";
 189                 swconfig,portmap = <1 1>;
 190         };
 191
 192         port@1 {
 193                 compatible = "swconfig,port";
 194                 reg = <1>;
 195                 swconfig,segment = "lan";
 196                 swconfig,portmap = <2 2>;
 197         };
 198
 199         port@2 {
 200                 compatible = "swconfig,port";
 201                 reg = <2>;
 202                 swconfig,segment = "lan";
 203                 swconfig,portmap = <3 3>;
 204         };
 205
 206         port@3 {
 207                 compatible = "swconfig,port";
 208                 reg = <3>;
 209                 swconfig,segment = "lan";
 210                 swconfig,portmap = <4 4>;
 211         };
 212
 213         port@4 {
 214                 compatible = "swconfig,port";
 215                 reg = <4>;
 216                 swconfig,segment = "wan";
 217                 swconfig,portmap = <5 5>;
 218         };
 219 };
 220
 221 &wmac {
 222         status = "okay";
 223
 224         mtd-cal-data = <&art 0x1000>;
 225         mtd-mac-address = <&art 0x1002>;
 226 };