target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar9344_tplink_tl-wdrxxxx.dtsi"
   4
   5 / {
   6         aliases {
   7                 label-mac-device = &ath9k;
   8         };
   9 };
  10
  11 &leds {
  12         usb1 {
  13                 label = "tp-link:green:usb1";
  14                 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  15                 trigger-sources = <&hub_port1>;
  16                 linux,default-trigger = "usbport";
  17         };
  18
  19         usb2 {
  20                 label = "tp-link:green:usb2";
  21                 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  22                 trigger-sources = <&hub_port2>;
  23                 linux,default-trigger = "usbport";
  24         };
  25 };
  26
  27 &gpio {
  28         lna0 {
  29                 gpio-hog;
  30                 gpios = <18 GPIO_ACTIVE_HIGH>;
  31                 output-high;
  32                 line-name = "tp-link:ext:lna0";
  33         };
  34
  35         lna1 {
  36                 gpio-hog;
  37                 gpios = <19 GPIO_ACTIVE_HIGH>;
  38                 output-high;
  39                 line-name = "tp-link:ext:lna1";
  40         };
  41
  42         usb1_power {
  43                 gpio-hog;
  44                 gpios = <22 GPIO_ACTIVE_HIGH>;
  45                 output-high;
  46                 line-name = "tp-link:power:usb1";
  47         };
  48
  49         usb2_power {
  50                 gpio-hog;
  51                 gpios = <21 GPIO_ACTIVE_HIGH>;
  52                 output-high;
  53                 line-name = "tp-link:power:usb2";
  54         };
  55 };
  56
  57 &usb {
  58         #address-cells = <1>;
  59         #size-cells = <0>;
  60         status = "okay";
  61
  62         port@1 {
  63                 #address-cells = <1>;
  64                 #size-cells = <0>;
  65                 reg = <1>;
  66                 #trigger-source-cells = <0>;
  67
  68                 hub_port1: port@1 {
  69                         reg = <1>;
  70                         #trigger-source-cells = <0>;
  71                 };
  72
  73                 hub_port2: port@2 {
  74                         reg = <2>;
  75                         #trigger-source-cells = <0>;
  76                 };
  77         };
  78 };
  79
  80 &usb_phy {
  81         status = "okay";
  82 };
  83
  84 &ath9k {
  85         mtd-mac-address = <&uboot 0x1fc00>;
  86 };
  87
  88 &wmac {
  89         mtd-mac-address = <&uboot 0x1fc00>;
  90         mtd-mac-address-increment = <(-1)>;
  91 };
  92
  93 &mdio0 {
  94         status = "okay";
  95
  96         phy-mask = <0>;
  97
  98         phy0: ethernet-phy@0 {
  99                 reg = <0>;
 100                 phy-mode = "rgmii";
 101
 102                 qca,ar8327-initvals = <
 103                         0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 104                         0x10 0x80000080 /* POWER_ON_STRIP */
 105                         0x50 0xc737c737 /* LED_CTRL0 */
 106                         0x54 0x00000000 /* LED_CTRL1 */
 107                         0x58 0x00000000 /* LED_CTRL2 */
 108                         0x5c 0x0030c300 /* LED_CTRL3 */
 109                         0x7c 0x0000007e /* PORT0_STATUS */
 110                         >;
 111         };
 112 };
 113
 114 &eth0 {
 115         status = "okay";
 116
 117         /* default for ar934x, except for 1000M */
 118         pll-data = <0x06000000 0x00000101 0x00001616>;
 119
 120         mtd-mac-address = <&uboot 0x1fc00>;
 121         mtd-mac-address-increment = <(-2)>;
 122
 123         phy-mode = "rgmii";
 124         phy-handle = <&phy0>;
 125 };