ath79: TP-Link Archer C7 v4 swap usb led names
[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9344_wd_mynet-wifi-rangeextender.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6
7 #include "ar9344.dtsi"
8
9 / {
10 model = "Western Digital My Net Wi-Fi Range Extender";
11 compatible = "wd,mynet-wifi-rangeextender", "qca,ar9344";
12
13 chosen {
14 bootargs = "console=ttyS0,115200n8";
15 };
16
17 aliases {
18 led-boot = &power;
19 led-failsafe = &power;
20 led-running = &power;
21 led-upgrade = &power;
22 };
23
24 leds {
25 compatible = "gpio-leds";
26
27 power: power {
28 label = "mynet-wifi-rangeextender:blue:power";
29 gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
30 /* LED has no off state. It's either on or it blinks */
31 };
32
33 lan {
34 label = "mynet-wifi-rangeextender:green:lan";
35 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
36 };
37
38 wifi {
39 label = "mynet-wifi-rangeextender:blue:wifi";
40 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
41 linux,default-trigger = "phy0tpt";
42 };
43
44 wifi-rssi-low {
45 label = "mynet-wifi-rangeextender:blue:rssi-low";
46 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
47 };
48
49 wifi-rssi-med {
50 label = "mynet-wifi-rangeextender:blue:rssi-med";
51 gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
52 };
53
54 wifi-rssi-max {
55 label = "mynet-wifi-rangeextender:blue:rssi-max";
56 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
57 };
58 };
59
60 keys {
61 compatible = "gpio-keys-polled";
62 poll-interval = <50>;
63
64 reset {
65 linux,code = <KEY_RESTART>;
66 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
67 debounce-interval = <60>;
68 };
69
70 band-switch {
71 linux,code = <BTN_1>;
72 gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
73 linux,input-type = <EV_SW>;
74 debounce-interval = <60>;
75 };
76
77 wps {
78 linux,code = <KEY_WPS_BUTTON>;
79 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
80 debounce-interval = <60>;
81 };
82 };
83 };
84
85 &ref {
86 clock-frequency = <25000000>;
87 };
88
89 &uart {
90 status = "okay";
91 };
92
93 &spi {
94 num-cs = <1>;
95
96 status = "okay";
97
98 flash@0 {
99 compatible = /* "s25fl064k", */ "jedec,spi-nor";
100 reg = <0>;
101 spi-max-frequency = <25000000>;
102
103 partitions {
104 compatible = "fixed-partitions";
105 #address-cells = <1>;
106 #size-cells = <1>;
107
108 uboot: partition@0 {
109 label = "u-boot";
110 reg = <0x0 0x040000>;
111 read-only;
112 };
113
114 partition@40000 {
115 label = "firmware";
116 reg = <0x40000 0x7a0000>;
117 compatible = "cybertan,trx";
118 };
119
120 nvram: partition@7e0000 {
121 label = "nvram";
122 reg = <0x7e0000 0x10000>;
123 };
124
125 art: partition@7f0000 {
126 label = "art";
127 reg = <0x7f0000 0x10000>;
128 read-only;
129 };
130 };
131 };
132 };
133
134 &pcie {
135 status = "okay";
136
137 ath9k: wifi@0,0 {
138 compatible = "pci168c,0030";
139 reg = <0x0000 0 0 0 0>;
140 qca,no-eeprom;
141 /* wifi MAC is stored in nvram */
142 };
143 };
144
145 &mdio0 {
146 status = "okay";
147
148 phy-mask = <0x10>;
149
150 phy4: ethernet-phy@4 {
151 reg = <4>;
152 };
153 };
154
155 &eth0 {
156 status = "okay";
157
158 pll-data = <0x0e000000 0x3c000101 0x3c001313>;
159
160 /* ethernet MAC is stored in nvram */
161 phy-mode = "rgmii";
162 phy-handle = <&phy4>;
163
164 gmac-config {
165 device = <&gmac>;
166 rgmii-gmac0 = <1>;
167 rxd-delay = <3>;
168 rxdv-delay = <3>;
169 };
170 };
171
172 &mdio1 {
173 status = "disabled";
174 };