target/linux/ath79/dts/ar934x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/clock/ath79-clk.h>
   4
   5 #include "ath79.dtsi"
   6
   7 / {
   8         compatible = "qca,ar9340";
   9
  10         #address-cells = <1>;
  11         #size-cells = <1>;
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200";
  15         };
  16
  17         cpus {
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20
  21                 cpu@0 {
  22                         device_type = "cpu";
  23                         compatible = "mips,mips74Kc";
  24                         clocks = <&pll ATH79_CLK_CPU>;
  25                         reg = <0>;
  26                 };
  27         };
  28
  29         clocks {
  30                 #address-cells = <1>;
  31                 #size-cells = <1>;
  32                 ranges;
  33
  34                 ref: ref {
  35                         #clock-cells = <0>;
  36                         compatible = "fixed-clock";
  37                         clock-output-names = "ref";
  38                 };
  39         };
  40
  41         ahb: ahb {
  42                 compatible = "simple-bus";
  43                 ranges;
  44
  45                 #address-cells = <1>;
  46                 #size-cells = <1>;
  47
  48                 apb: apb {
  49                         compatible = "simple-bus";
  50                         ranges;
  51
  52                         #address-cells = <1>;
  53                         #size-cells = <1>;
  54
  55                         ddr_ctrl: memory-controller@18000000 {
  56                                 compatible = "qca,ar9340-ddr-controller",
  57                                                 "qca,ar7240-ddr-controller";
  58                                 reg = <0x18000000 0x12c>;
  59
  60                                 #qca,ddr-wb-channel-cells = <1>;
  61                         };
  62
  63                         uart: uart@18020000 {
  64                                 compatible = "ns16550a";
  65                                 reg = <0x18020000 0x2c>;
  66
  67                                 interrupts = <3>;
  68
  69                                 clocks = <&pll ATH79_CLK_REF>;
  70                                 clock-names = "uart";
  71
  72                                 reg-io-width = <4>;
  73                                 reg-shift = <2>;
  74                                 no-loopback-test;
  75
  76                                 status = "disabled";
  77                         };
  78
  79                         gpio: gpio@18040000 {
  80                                 compatible = "qca,ar9340-gpio";
  81                                 reg = <0x18040000 0x2c>;
  82
  83                                 interrupts = <2>;
  84                                 ngpios = <23>;
  85
  86                                 gpio-controller;
  87                                 #gpio-cells = <2>;
  88
  89                                 interrupt-controller;
  90                                 #interrupt-cells = <2>;
  91                         };
  92
  93                         pinmux: pinmux@1804002c {
  94                                 compatible = "pinctrl-single";
  95
  96                                 reg = <0x1804002c 0x44>;
  97
  98                                 #size-cells = <0>;
  99
 100                                 pinctrl-single,bit-per-mux;
 101                                 pinctrl-single,register-width = <32>;
 102                                 pinctrl-single,function-mask = <0x1>;
 103                                 #pinctrl-cells = <2>;
 104
 105                                 jtag_disable_pins: pinmux_jtag_disable_pins {
 106                                         pinctrl-single,bits = <0x40 0x2 0x2>;
 107                                 };
 108                         };
 109
 110                         pll: pll-controller@18050000 {
 111                                 compatible = "qca,ar9340-pll", "syscon";
 112                                 reg = <0x18050000 0x4c>;
 113
 114                                 #clock-cells = <1>;
 115                                 clocks = <&ref>;
 116                                 clock-names = "ref";
 117                                 clock-output-names = "cpu", "ddr", "ahb";
 118                         };
 119
 120                         wdt: wdt@18060008 {
 121                                 compatible = "qca,ar9340-wdt", "qca,ar7130-wdt";
 122                                 reg = <0x18060008 0x8>;
 123
 124                                 interrupts = <4>;
 125
 126                                 clocks = <&pll ATH79_CLK_AHB>;
 127                                 clock-names = "wdt";
 128                         };
 129
 130                         rst: reset-controller@1806001c {
 131                                 compatible = "qca,ar9340-reset", "qca,ar7100-reset";
 132                                 reg = <0x1806001c 0x4>;
 133
 134                                 #reset-cells = <1>;
 135                         };
 136                 };
 137
 138                 nand: nand@1b000200 {
 139                         compatible = "qca,ar934x-nand";
 140                         reg = <0x1b000200 0xb8>;
 141
 142                         interrupts = <21>;
 143                         interrupt-parent = <&miscintc>;
 144
 145                         resets = <&rst 14>;
 146                         reset-names = "nand";
 147
 148                         nand-ecc-mode = "hw";
 149
 150                         #address-cells = <1>;
 151                         #size-cells = <0>;
 152
 153                         status = "disabled";
 154                 };
 155
 156                 gmac: gmac@18070000 {
 157                         compatible = "qca,ar9340-gmac";
 158                         reg = <0x18070000 0x14>;
 159                 };
 160
 161                 wmac: wmac@18100000 {
 162                         compatible = "qca,ar9340-wmac";
 163                         reg = <0x18100000 0x20000>;
 164
 165                         status = "disabled";
 166                 };
 167
 168                 usb: usb@1b000000 {
 169                         compatible = "generic-ehci";
 170                         reg = <0x1b000000 0x1d8>;
 171
 172                         interrupts = <3>;
 173                         resets = <&rst 5>;
 174                         reset-names = "usb-host";
 175
 176                         has-transaction-translator;
 177                         caps-offset = <0x100>;
 178
 179                         phy-names = "usb-phy";
 180                         phys = <&usb_phy>;
 181
 182                         status = "disabled";
 183                 };
 184
 185                 spi: spi@1f000000 {
 186                         compatible = "qca,ar9340-spi", "qca,ar7100-spi";
 187                         reg = <0x1f000000 0x1c>;
 188
 189                         clocks = <&pll ATH79_CLK_AHB>;
 190                         clock-names = "ahb";
 191
 192                         #address-cells = <1>;
 193                         #size-cells = <0>;
 194
 195                         status = "disabled";
 196                 };
 197         };
 198
 199         usb_phy: usb-phy {
 200                 compatible = "qca,ar9340-usb-phy", "qca,ar7200-usb-phy";
 201
 202                 reset-names = "usb-phy", "usb-suspend-override";
 203                 resets = <&rst 4>, <&rst 3>;
 204
 205                 #phy-cells = <0>;
 206
 207                 status = "disabled";
 208         };
 209 };
 210
 211 &mdio0 {
 212         compatible = "qca,ar9340-mdio";
 213 };
 214
 215 &eth0 {
 216         compatible = "qca,ar9340-eth", "syscon";
 217
 218         pll-data = <0x16000000 0x00000101 0x00001616>;
 219         pll-reg = <0x4 0x2c 17>;
 220         pll-handle = <&pll>;
 221         resets = <&rst 9>, <&rst 22>;
 222         reset-names = "mac", "mdio";
 223 };
 224
 225 &mdio1 {
 226         status = "okay";
 227
 228         compatible = "qca,ar9340-mdio";
 229         resets = <&rst 23>;
 230         reset-names = "mdio";
 231         builtin-switch;
 232
 233         builtin_switch: switch0@1f {
 234                 compatible = "qca,ar8229";
 235
 236                 reg = <0x1f>;
 237                 resets = <&rst 8>;
 238                 reset-names = "switch";
 239                 phy-mode = "gmii";
 240                 qca,mib-poll-interval = <500>;
 241                 qca,phy4-mii-enable;
 242
 243                 mdio-bus {
 244                         #address-cells = <1>;
 245                         #size-cells = <0>;
 246
 247                         swphy0: ethernet-phy@0 {
 248                                 reg = <0>;
 249                                 phy-mode = "mii";
 250                         };
 251
 252                         swphy4: ethernet-phy@4 {
 253                                 reg = <4>;
 254                                 phy-mode = "mii";
 255                         };
 256                 };
 257         };
 258 };
 259
 260 &eth1 {
 261         compatible = "qca,ar9340-eth", "syscon";
 262
 263         resets = <&rst 13>;
 264         reset-names = "mac";
 265         phy-mode = "gmii";
 266
 267         fixed-link {
 268                 speed = <1000>;
 269                 full-duplex;
 270         };
 271 };