target/linux/ath79/dts/qca9531_comfast_cf-e130n-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "comfast,cf-e130n-v2", "qca,qca9531";
  11         model = "COMFAST CF-E130N v2";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &led_rssihigh;
  16                 led-failsafe = &led_rssihigh;
  17                 led-upgrade = &led_rssihigh;
  18                 label-mac-device = &eth1;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 pinctrl-names = "default";
  25
  26                 wlan {
  27                         label = "cf-e130n-v2:green:wlan";
  28                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  29                         linux,default-trigger = "phy0tpt";
  30                 };
  31
  32                 lan {
  33                         label = "cf-e130n-v2:green:lan";
  34                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 unused {
  38                         label = "cf-e130n-v2:green:unused";
  39                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 rssilow {
  43                         label = "cf-e130n-v2:red:rssilow";
  44                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 rssimediumlow {
  48                         label = "cf-e130n-v2:red:rssimediumlow";
  49                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 rssimediumhigh {
  53                         label = "cf-e130n-v2:green:rssimediumhigh";
  54                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 led_rssihigh: rssihigh {
  58                         label = "cf-e130n-v2:green:rssihigh";
  59                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  60                 };
  61         };
  62
  63         keys {
  64                 compatible = "gpio-keys";
  65
  66                 reset {
  67                         label = "reset";
  68                         linux,code = <KEY_RESTART>;
  69                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  70                         debounce-interval = <60>;
  71                 };
  72         };
  73 };
  74
  75 &spi {
  76         status = "okay";
  77
  78         num-cs = <1>;
  79
  80         flash@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <25000000>;
  84
  85                 partitions {
  86                         compatible = "fixed-partitions";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89
  90                         partition@0 {
  91                                 label = "u-boot";
  92                                 reg = <0x000000 0x010000>;
  93                                 read-only;
  94                         };
  95
  96                         art: partition@10000 {
  97                                 label = "art";
  98                                 reg = <0x010000 0x010000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@20000 {
 103                                 compatible = "denx,uimage";
 104                                 label = "firmware";
 105                                 reg = <0x020000 0x7c0000>;
 106                         };
 107
 108                         partition@7e0000 {
 109                                 label = "configs";
 110                                 reg = <0x7e0000 0x010000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@7f0000 {
 115                                 label = "nvram";
 116                                 reg = <0x7f0000 0x010000>;
 117                                 read-only;
 118                         };
 119                 };
 120         };
 121 };
 122
 123 &uart {
 124         status = "okay";
 125
 126 };
 127
 128 &eth0 {
 129         compatible = "syscon", "simple-mfd";
 130 };
 131
 132 &eth1 {
 133         status = "okay";
 134
 135         phy-handle = <&swphy0>;
 136
 137         mtd-mac-address = <&art 0x0>;
 138
 139         gmac-config {
 140                 device = <&gmac>;
 141                 switch-phy-swap = <1>;
 142         };
 143 };
 144
 145 &wmac {
 146         status = "okay";
 147
 148         mtd-mac-address = <&art 0x0>;
 149         mtd-cal-data = <&art 0x1000>;
 150 };