target/linux/ath79/dts/qca9531_comfast_cf-e5.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "comfast,cf-e5", "qca,qca9531";
  11         model = "COMFAST CF-E5/E7";
  12
  13         keys {
  14                 compatible = "gpio-keys-polled";
  15                 poll-interval = <20>;
  16
  17                 button0 {
  18                         label = "reset";
  19                         linux,code = <KEY_RESTART>;
  20                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  21                 };
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26                 pinctrl-names = "default";
  27                 pinctrl-0 = <&jtag_disable_pins &led_wan_pin>;
  28
  29                 wan {
  30                         label = "cf-e5:blue:wan";
  31                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 lan {
  35                         label = "cf-e5:blue:lan";
  36                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wlan {
  40                         label = "cf-e5:blue:wlan";
  41                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44
  45                 rssi0 {
  46                         label = "cf-e5:blue:rssi0";
  47                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 rssi1 {
  51                         label = "cf-e5:blue:rssi1";
  52                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 rssi2 {
  56                         label = "cf-e5:blue:rssi2";
  57                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60 };
  61
  62 &uart {
  63         status = "okay";
  64 };
  65
  66 &usb0 {
  67         #address-cells = <1>;
  68         #size-cells = <0>;
  69         status = "okay";
  70
  71         hub_port: port@1 {
  72                 reg = <1>;
  73                 #trigger-source-cells = <0>;
  74         };
  75 };
  76
  77 &usb_phy {
  78         status = "okay";
  79 };
  80
  81 &spi {
  82         status = "okay";
  83         num-cs = <1>;
  84
  85         flash@0 {
  86                 compatible = "jedec,spi-nor";
  87                 reg = <0>;
  88                 spi-max-frequency = <25000000>;
  89
  90                 partitions {
  91                         compatible = "fixed-partitions";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94
  95                         partition@0 {
  96                                 label = "u-boot";
  97                                 reg = <0x000000 0x010000>;
  98                                 read-only;
  99                         };
 100
 101                         art: partition@10000 {
 102                                 label = "art";
 103                                 reg = <0x010000 0x010000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@20000 {
 108                                 compatible = "denx,uimage";
 109                                 label = "firmware";
 110                                 reg = <0x020000 0xfd0000>;
 111                         };
 112
 113                         partition@ff0000 {
 114                                 label = "art-backup";
 115                                 reg = <0xff0000 0x010000>;
 116                                 read-only;
 117                         };
 118                 };
 119         };
 120 };
 121
 122 &eth0 {
 123         status = "okay";
 124         mtd-mac-address = <&art 0x0>;
 125         phy-handle = <&swphy4>;
 126 };
 127
 128 &eth1 {
 129         mtd-mac-address = <&art 0x6>;
 130 };
 131
 132 &wmac {
 133         status = "okay";
 134         mtd-cal-data = <&art 0x1000>;
 135 };
 136
 137 &pinmux {
 138         led_wan_pin: pinmux_led_wan_pin {
 139                 pinctrl-single,bits = <0x4 0x0 0xff>;
 140         };
 141 };