target/linux/ath79/dts/qca9531_comfast_cf-e5.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "comfast,cf-e5", "qca,qca9531";
  11         model = "COMFAST CF-E5/E7";
  12
  13         aliases {
  14                 label-mac-device = &eth0;
  15         };
  16
  17         keys {
  18                 compatible = "gpio-keys";
  19
  20                 button0 {
  21                         label = "reset";
  22                         linux,code = <KEY_RESTART>;
  23                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  24                 };
  25         };
  26
  27         leds {
  28                 compatible = "gpio-leds";
  29                 pinctrl-names = "default";
  30                 pinctrl-0 = <&jtag_disable_pins &led_wan_pin>;
  31
  32                 wan {
  33                         label = "cf-e5:blue:wan";
  34                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 lan {
  38                         label = "cf-e5:blue:lan";
  39                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 wlan {
  43                         label = "cf-e5:blue:wlan";
  44                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  45                         linux,default-trigger = "phy0tpt";
  46                 };
  47
  48                 rssi0 {
  49                         label = "cf-e5:blue:rssi0";
  50                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 rssi1 {
  54                         label = "cf-e5:blue:rssi1";
  55                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 rssi2 {
  59                         label = "cf-e5:blue:rssi2";
  60                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63 };
  64
  65 &uart {
  66         status = "okay";
  67 };
  68
  69 &usb0 {
  70         #address-cells = <1>;
  71         #size-cells = <0>;
  72         status = "okay";
  73
  74         hub_port: port@1 {
  75                 reg = <1>;
  76                 #trigger-source-cells = <0>;
  77         };
  78 };
  79
  80 &usb_phy {
  81         status = "okay";
  82 };
  83
  84 &spi {
  85         status = "okay";
  86         num-cs = <1>;
  87
  88         flash@0 {
  89                 compatible = "jedec,spi-nor";
  90                 reg = <0>;
  91                 spi-max-frequency = <25000000>;
  92
  93                 partitions {
  94                         compatible = "fixed-partitions";
  95                         #address-cells = <1>;
  96                         #size-cells = <1>;
  97
  98                         partition@0 {
  99                                 label = "u-boot";
 100                                 reg = <0x000000 0x010000>;
 101                                 read-only;
 102                         };
 103
 104                         art: partition@10000 {
 105                                 label = "art";
 106                                 reg = <0x010000 0x010000>;
 107                                 read-only;
 108                         };
 109
 110                         partition@20000 {
 111                                 compatible = "denx,uimage";
 112                                 label = "firmware";
 113                                 reg = <0x020000 0xfd0000>;
 114                         };
 115
 116                         partition@ff0000 {
 117                                 label = "art-backup";
 118                                 reg = <0xff0000 0x010000>;
 119                                 read-only;
 120                         };
 121                 };
 122         };
 123 };
 124
 125 &eth0 {
 126         status = "okay";
 127         mtd-mac-address = <&art 0x0>;
 128         phy-handle = <&swphy4>;
 129 };
 130
 131 &eth1 {
 132         mtd-mac-address = <&art 0x6>;
 133 };
 134
 135 &wmac {
 136         status = "okay";
 137         mtd-cal-data = <&art 0x1000>;
 138 };
 139
 140 &pinmux {
 141         led_wan_pin: pinmux_led_wan_pin {
 142                 pinctrl-single,bits = <0x4 0x0 0xff>;
 143         };
 144 };