target/linux/ath79/dts/qca9531_comfast_cf-e560ac.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "comfast,cf-e560ac", "qca,qca9531";
  10         model = "COMFAST CF-E560AC";
  11
  12         aliases {
  13                 serial0 = &uart;
  14                 label-mac-device = &eth1;
  15                 led-boot = &led_system;
  16                 led-failsafe = &led_system;
  17                 led-upgrade = &led_system;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         linux,code = <KEY_RESTART>;
  26                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                 };
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33
  34                 pinctrl-names = "default";
  35                 pinctrl-0 = <&jtag_disable_pins>;
  36
  37                 lan1 {
  38                         label = "blue:lan1";
  39                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 lan2 {
  43                         label = "blue:lan2";
  44                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 lan3 {
  48                         label = "blue:lan3";
  49                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 lan4 {
  53                         label = "blue:lan4";
  54                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 led_system: system {
  58                         label = "blue:system";
  59                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 wan {
  63                         label = "blue:wan";
  64                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 wlan {
  68                         label = "blue:wlan";
  69                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  70                         linux,default-trigger = "phy0tpt";
  71                 };
  72         };
  73
  74         watchdog {
  75                 compatible = "linux,wdt-gpio";
  76                 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  77                 hw_algo = "toggle";
  78                 hw_margin_ms = <1200>;
  79                 always-running;
  80         };
  81 };
  82
  83 &spi {
  84         status = "okay";
  85
  86         flash@0 {
  87                 compatible = "jedec,spi-nor";
  88                 reg = <0>;
  89                 spi-max-frequency = <25000000>;
  90
  91                 partitions {
  92                         compatible = "fixed-partitions";
  93                         #address-cells = <1>;
  94                         #size-cells = <1>;
  95
  96                         partition@0 {
  97                                 label = "u-boot";
  98                                 reg = <0x000000 0x010000>;
  99                                 read-only;
 100                         };
 101
 102                         art: partition@10000 {
 103                                 label = "art";
 104                                 reg = <0x010000 0x010000>;
 105                                 read-only;
 106
 107                                 nvmem-layout {
 108                                         compatible = "fixed-layout";
 109                                         #address-cells = <1>;
 110                                         #size-cells = <1>;
 111
 112                                         macaddr_art_0: macaddr@0 {
 113                                                 compatible = "mac-base";
 114                                                 reg = <0x0 0x6>;
 115                                                 #nvmem-cell-cells = <1>;
 116                                         };
 117                                 };
 118                         };
 119
 120                         partition@20000 {
 121                                 compatible = "denx,uimage";
 122                                 label = "firmware";
 123                                 reg = <0x020000 0xfc0000>;
 124                         };
 125
 126                         partition@fe0000 {
 127                                 label = "configs";
 128                                 reg = <0xfe0000 0x010000>;
 129                                 read-only;
 130                         };
 131
 132                         partition@ff0000 {
 133                                 label = "nvram";
 134                                 reg = <0xff0000 0x010000>;
 135                                 read-only;
 136                         };
 137                 };
 138         };
 139 };
 140
 141 &pcie0 {
 142         status = "okay";
 143 };
 144
 145 &usb_phy {
 146         status = "okay";
 147 };
 148
 149 &usb0 {
 150         status = "okay";
 151 };
 152
 153 &eth0 {
 154         status = "okay";
 155
 156         phy-handle = <&swphy4>;
 157
 158         nvmem-cells = <&macaddr_art_0 1>;
 159         nvmem-cell-names = "mac-address";
 160 };
 161
 162 &eth1 {
 163         nvmem-cells = <&macaddr_art_0 0>;
 164         nvmem-cell-names = "mac-address";
 165 };
 166
 167 &wmac {
 168         status = "okay";
 169
 170         mtd-cal-data = <&art 0x1000>;
 171         nvmem-cells = <&macaddr_art_0 10>;
 172         nvmem-cell-names = "mac-address";
 173 };