target/linux/ath79/dts/qca9531_comfast_cf-ew72.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "comfast,cf-ew72", "qca,qca9531";
  10         model = "COMFAST CF-EW72";
  11
  12         aliases {
  13                 serial0 = &uart;
  14                 led-boot = &led_wan;
  15                 led-failsafe = &led_wan;
  16                 led-upgrade = &led_wan;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 pinctrl-names = "default";
  23                 pinctrl-0 = <&jtag_disable_pins>;
  24
  25                 lan {
  26                         label = "blue:lan";
  27                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 led_wan: wan {
  31                         label = "blue:wan";
  32                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wlan {
  36                         label = "blue:wlan";
  37                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys";
  44
  45                 reset {
  46                         label = "reset";
  47                         linux,code = <KEY_RESTART>;
  48                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  49                         debounce-interval = <60>;
  50                 };
  51         };
  52
  53         watchdog {
  54                 compatible = "linux,wdt-gpio";
  55
  56                 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  57                 hw_algo = "toggle";
  58                 hw_margin_ms = <1200>;
  59                 always-running;
  60         };
  61 };
  62
  63 &pcie0 {
  64         status = "okay";
  65 };
  66
  67 &spi {
  68         status = "okay";
  69
  70         flash@0 {
  71                 compatible = "winbond,w25q128", "jedec,spi-nor";
  72                 reg = <0>;
  73                 spi-max-frequency = <25000000>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 label = "u-boot";
  82                                 reg = <0x000000 0x010000>;
  83                                 read-only;
  84                         };
  85
  86                         art: partition@10000 {
  87                                 label = "art";
  88                                 reg = <0x010000 0x010000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@20000 {
  93                                 compatible = "denx,uimage";
  94                                 label = "firmware";
  95                                 reg = <0x020000 0xfd0000>;
  96                         };
  97
  98                         partition@ff0000 {
  99                                 label = "nvram";
 100                                 reg = <0xff0000 0x010000>;
 101                                 read-only;
 102                         };
 103                 };
 104         };
 105 };
 106
 107 &eth0 {
 108         status = "okay";
 109
 110         phy-handle = <&swphy4>;
 111
 112         nvmem-cells = <&macaddr_art_0>;
 113         nvmem-cell-names = "mac-address";
 114         mac-address-increment = <1>;
 115 };
 116
 117 &eth1 {
 118         nvmem-cells = <&macaddr_art_0>;
 119         nvmem-cell-names = "mac-address";
 120 };
 121
 122 &wmac {
 123         status = "okay";
 124
 125         mtd-cal-data = <&art 0x1000>;
 126         nvmem-cells = <&macaddr_art_0>;
 127         nvmem-cell-names = "mac-address";
 128         mac-address-increment = <3>;
 129 };
 130
 131 &art {
 132         compatible = "nvmem-cells";
 133         #address-cells = <1>;
 134         #size-cells = <1>;
 135
 136         macaddr_art_0: macaddr@0 {
 137                 reg = <0x0 0x6>;
 138         };
 139 };