target/linux/ath79/dts/qca9531_engenius_ews511ap.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "engenius,ews511ap", "qca,qca9531";
  11         model = "EnGenius EWS511AP";
  12
  13         keys {
  14                 compatible = "gpio-keys";
  15
  16                 pinctrl-names = "default";
  17                 pinctrl-0 = <&jtag_disable_pins>;
  18
  19                 reset {
  20                         label = "reset";
  21                         linux,code = <KEY_RESTART>;
  22                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         aliases {
  27                 led-boot = &power_led;
  28                 led-failsafe = &power_led;
  29                 led-running = &power_led;
  30                 led-upgrade = &power_led;
  31         };
  32
  33         leds {
  34                 compatible = "gpio-leds";
  35
  36                 power_led: power {
  37                         label = "ews511ap:amber:power";
  38                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  39                         default-state = "on";
  40                 };
  41
  42                 lan1 {
  43                         label = "ews511ap:blue:lan1";
  44                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 lan2 {
  48                         label = "ews511ap:blue:lan2";
  49                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wlan2g {
  53                         label = "ews511ap:green:wlan2g";
  54                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy0tpt";
  56                 };
  57
  58                 wlan5g {
  59                         label = "ews511ap:green:wlan5g";
  60                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  61                         linux,default-trigger = "phy1tpt";
  62                 };
  63         };
  64
  65         watchdog {
  66                 compatible = "linux,wdt-gpio";
  67
  68                 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  69                 hw_algo = "toggle";
  70                 /* hw_margin_ms is actually 300s but driver limits it to 60s */
  71                 hw_margin_ms = <60000>;
  72                 always-running;
  73         };
  74 };
  75
  76 &wdt {
  77         status = "okay";
  78 };
  79
  80 &rst {
  81         status = "okay";
  82 };
  83
  84 &pcie0 {
  85         status = "okay";
  86 };
  87
  88 &uart {
  89         status = "okay";
  90 };
  91
  92 &spi {
  93         status = "okay";
  94         num-cs = <0>;
  95
  96         flash@0 {
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <25000000>;
 100
 101                 partitions {
 102                         compatible = "fixed-partitions";
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105
 106                         partition@0 {
 107                                 label = "u-boot";
 108                                 reg = <0x000000 0x040000>;
 109                                 read-only;
 110                         };
 111
 112                         ubootenv: partition@40000 {
 113                                 label = "u-boot-env";
 114                                 reg = <0x040000 0x010000>;
 115                         };
 116
 117                         art: partition@50000 {
 118                                 label = "art";
 119                                 reg = <0x050000 0x010000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@60000 {
 124                                 compatible = "denx,uimage";
 125                                 label = "firmware";
 126                                 reg = <0x060000 0xfa0000>;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &eth0 {
 133         status = "okay";
 134         phy-handle = <&swphy4>;
 135 };
 136
 137 &eth1 {
 138         status = "okay";
 139 };
 140
 141 &wmac {
 142         status = "okay";
 143         mtd-cal-data = <&art 0x1000>;
 144 };