target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca953x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_status;
  11                 led-failsafe = &led_status;
  12                 led-running = &led_status;
  13                 led-upgrade = &led_status;
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys-polled";
  18                 poll-interval = <20>;
  19                 pinctrl-names = "default";
  20                 pinctrl-0 = <&jtag_disable_pins>;
  21
  22                 button0 {
  23                         label = "reset";
  24                         linux,code = <KEY_RESTART>;
  25                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 button1 {
  29                         label = "button right";
  30                         linux,code = <BTN_0>;
  31                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  32                 };
  33
  34                 button3 {
  35                         label = "button left";
  36                         linux,code = <BTN_1>;
  37                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  38                 };
  39         };
  40
  41         leds {
  42                 compatible = "gpio-leds";
  43
  44                 wlan {
  45                         label = "gl-ar300m:green:wlan";
  46                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  47                         linux,default-trigger = "phy0tpt";
  48                 };
  49
  50                 lan {
  51                         label = "gl-ar300m:green:lan";
  52                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 led_status: status {
  56                         label = "gl-ar300m:red:status";
  57                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60 };
  61
  62 &pcie0 {
  63         status = "okay";
  64 };
  65
  66 &uart {
  67         status = "okay";
  68 };
  69
  70 &usb0 {
  71         #address-cells = <1>;
  72         #size-cells = <0>;
  73         status = "okay";
  74 };
  75
  76 &usb_phy {
  77         status = "okay";
  78 };
  79
  80 &eth0 {
  81         status = "okay";
  82         mtd-mac-address = <&art 0x0>;
  83         phy-handle = <&swphy4>;
  84 };
  85
  86 &eth1 {
  87         mtd-mac-address = <&art 0x0>;
  88         mtd-mac-address-increment = <1>;
  89 };
  90
  91 &wmac {
  92         status = "okay";
  93         mtd-cal-data = <&art 0x1000>;
  94         mtd-mac-address = <&art 0x1002>;
  95 };