target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "glinet,gl-ar750", "qca,qca9531";
  11         model = "GL.iNet GL-AR750";
  12
  13         keys {
  14                 compatible = "gpio-keys";
  15
  16                 pinctrl-names = "default";
  17                 pinctrl-0 = <&jtag_disable_pins>;
  18
  19                 reset {
  20                         label = "reset";
  21                         linux,code = <KEY_RESTART>;
  22                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 mode {
  26                         label = "mode";
  27                         linux,code = <BTN_0>;
  28                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  29                 };
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34
  35                 power {
  36                         label = "gl-ar750:white:power";
  37                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  38                         default-state = "on";
  39                 };
  40
  41                 wlan2g {
  42                         label = "gl-ar750:white:wlan2g";
  43                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "phy1tpt";
  45                 };
  46
  47                 wlan5g {
  48                         label = "gl-ar750:white:wlan5g";
  49                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  50                         linux,default-trigger = "phy0tpt";
  51                 };
  52
  53         };
  54
  55         i2c {
  56                 compatible = "i2c-gpio";
  57
  58                 sda-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  59                 scl-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  60         };
  61
  62
  63 };
  64
  65 &pcie0 {
  66         status = "okay";
  67
  68         wifi@0,0 {
  69                 compatible = "qcom,ath10k";
  70                 reg = <0 0 0 0 0>;
  71                 device_type = "pci";
  72         };
  73 };
  74
  75 &uart {
  76         status = "okay";
  77 };
  78
  79 &usb0 {
  80         status = "okay";
  81 };
  82
  83 &usb_phy {
  84         status = "okay";
  85 };
  86
  87 &spi {
  88         status = "okay";
  89         num-cs = <0>;
  90
  91         flash@0 {
  92                 compatible = "jedec,spi-nor";
  93                 reg = <0>;
  94                 spi-max-frequency = <25000000>;
  95
  96                 partitions {
  97                         compatible = "fixed-partitions";
  98                         #address-cells = <1>;
  99                         #size-cells = <1>;
 100
 101                         partition@0 {
 102                                 label = "u-boot";
 103                                 reg = <0x000000 0x040000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@40000 {
 108                                 label = "u-boot-env";
 109                                 reg = <0x040000 0x010000>;
 110                                 read-only;
 111                         };
 112
 113                         art: partition@50000 {
 114                                 label = "art";
 115                                 reg = <0x050000 0x010000>;
 116                                 read-only;
 117                         };
 118
 119                         partition@60000 {
 120                                 compatible = "denx,uimage";
 121                                 label = "firmware";
 122                                 reg = <0x060000 0xfa0000>;
 123                         };
 124                 };
 125         };
 126 };
 127
 128 &eth0 {
 129         status = "okay";
 130         mtd-mac-address = <&art 0x0>;
 131         phy-handle = <&swphy4>;
 132 };
 133
 134 &eth1 {
 135         mtd-mac-address = <&art 0x0>;
 136         mtd-mac-address-increment = <1>;
 137 };
 138
 139 &wmac {
 140         status = "okay";
 141         mtd-cal-data = <&art 0x1000>;
 142 };