target/linux/ath79/dts/qca9533_comfast_cf-e110n-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "comfast,cf-e110n-v2", "qca,qca9533";
  11         model = "COMFAST CF-E110N v2";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &wan;
  16                 led-failsafe = &wan;
  17                 led-upgrade = &wan;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&jtag_disable_pins &led_rssilow_pin &led_rssimediumhigh_pin &led_rssihigh_pin>;
  25
  26                 wan: wan {
  27                         label = "cf-e110n-v2:green:wan";
  28                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 lan {
  32                         label = "cf-e110n-v2:green:lan";
  33                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 rssilow {
  37                         label = "cf-e110n-v2:red:rssilow";
  38                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 rssimediumlow {
  42                         label = "cf-e110n-v2:red:rssimediumlow";
  43                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 rssimediumhigh {
  47                         label = "cf-e110n-v2:green:rssimediumhigh";
  48                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 rssihigh {
  52                         label = "cf-e110n-v2:green:rssihigh";
  53                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56
  57         ath9k-leds {
  58                 compatible = "gpio-leds";
  59
  60                 wlan {
  61                         label = "cf-e110n-v2:green:wlan";
  62                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  63                         linux,default-trigger = "phy0tpt";
  64                 };
  65         };
  66
  67         keys {
  68                 compatible = "gpio-keys";
  69
  70                 reset {
  71                         label = "reset";
  72                         linux,code = <KEY_RESTART>;
  73                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  74                         debounce-interval = <60>;
  75                 };
  76         };
  77 };
  78
  79 &pinmux {
  80         led_rssilow_pin: pinmux_rssilow_pin {
  81                 pinctrl-single,bits = <0x8 0x0 0xff000000>;
  82         };
  83
  84         led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin {
  85                 pinctrl-single,bits = <0xc 0x0 0x00ff0000>;
  86         };
  87
  88         led_rssihigh_pin: pinmux_rssihigh_pin {
  89                 pinctrl-single,bits = <0x10 0x0 0x000000ff>;
  90         };
  91 };
  92
  93 &spi {
  94         status = "okay";
  95         num-cs = <1>;
  96
  97         flash@0 {
  98                 compatible = "winbond,w25q128", "jedec,spi-nor";
  99                 reg = <0>;
 100                 spi-max-frequency = <25000000>;
 101
 102                 partitions {
 103                         compatible = "fixed-partitions";
 104                         #address-cells = <1>;
 105                         #size-cells = <1>;
 106
 107                         partition@0 {
 108                                 label = "u-boot";
 109                                 reg = <0x000000 0x010000>;
 110                                 read-only;
 111                         };
 112
 113                         art: partition@10000 {
 114                                 label = "art";
 115                                 reg = <0x010000 0x010000>;
 116                                 read-only;
 117                         };
 118
 119                         partition@20000 {
 120                                 compatible = "denx,uimage";
 121                                 label = "firmware";
 122                                 reg = <0x020000 0xfd0000>;
 123                         };
 124
 125                         partition@ff0000 {
 126                                 label = "nvram";
 127                                 reg = <0xff0000 0x010000>;
 128                                 read-only;
 129                         };
 130                 };
 131         };
 132 };
 133
 134 &uart {
 135         status = "okay";
 136 };
 137
 138 &eth0 {
 139         status = "okay";
 140         mtd-mac-address = <&art 0x0>;
 141         phy-handle = <&swphy4>;
 142 };
 143
 144 &eth1 {
 145         status = "okay";
 146         mtd-mac-address = <&art 0x1002>;
 147
 148         gmac-config {
 149                 device = <&gmac>;
 150         };
 151 };
 152
 153 &wmac {
 154         status = "okay";
 155         mtd-cal-data = <&art 0x1000>;
 156         mtd-mac-address = <&art 0x6>;
 157 };