target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &led_link4;
  16                 led-failsafe = &led_link4;
  17                 led-running = &led_link4;
  18                 led-upgrade = &led_link4;
  19         };
  20
  21         leds: leds {
  22                 compatible = "gpio-leds";
  23
  24                 link1 {
  25                         label = "tp-link:green:link1";
  26                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 link2 {
  30                         label = "tp-link:green:link2";
  31                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 link3 {
  35                         label = "tp-link:green:link3";
  36                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 led_link4: link4 {
  40                         label = "tp-link:green:link4";
  41                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys-polled";
  47                 poll-interval = <100>;
  48
  49                 reset_button {
  50                         label = "Reset button";
  51                         linux,code = <KEY_RESTART>;
  52                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55 };
  56
  57 &uart {
  58         status = "okay";
  59 };
  60
  61 &spi {
  62         status = "okay";
  63
  64         num-cs = <1>;
  65
  66         flash@0 {
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <25000000>;
  72
  73                 partitions {
  74                         compatible = "fixed-partitions";
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77
  78                         uboot: partition@0 {
  79                                 label = "u-boot";
  80                                 reg = <0x000000 0x020000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@20000 {
  85                                 label = "partition-table";
  86                                 reg = <0x020000 0x010000>;
  87                                 read-only;
  88                         };
  89
  90                         info: partition@30000 {
  91                                 label = "info";
  92                                 reg = <0x030000 0x010000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@40000 {
  97                                 label = "firmware";
  98                                 reg = <0x040000 0x780000>;
  99                                 compatible = "tplink,firmware";
 100                         };
 101
 102                         config: partition@7c0000 {
 103                                 label = "config";
 104                                 reg = <0x7c0000 0x030000>;
 105                                 read-only;
 106                         };
 107
 108                         art: partition@7f0000 {
 109                                 label = "art";
 110                                 reg = <0x7f0000 0x010000>;
 111                                 read-only;
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &wmac {
 118         status = "okay";
 119
 120         mtd-cal-data = <&art 0x1000>;
 121         mtd-mac-address = <&info 0x8>;
 122 };
 123
 124 &eth0 {
 125         status = "okay";
 126
 127         phy-handle = <&swphy4>;
 128
 129         mtd-mac-address = <&info 0x8>;
 130 };