target/linux/ath79/dts/qca9533_tplink_tl-wa850re-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wa850re-v2", "qca,qca9533";
  11         model = "TP-Link TL-WA850RE v2";
  12
  13         aliases {
  14                 led-boot = &led_re;
  15                 led-failsafe = &led_re;
  16                 led-running = &led_re;
  17                 led-upgrade = &led_re;
  18                 label-mac-device = &wmac;
  19         };
  20
  21         chosen {
  22                 bootargs = "console=ttyS0,115200n8";
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&jtag_disable_pins>;
  30
  31                 lan {
  32                         label = "tp-link:blue:lan";
  33                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 led_re: re {
  37                         label = "tp-link:blue:re";
  38                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 signal1 {
  42                         label = "tp-link:blue:signal1";
  43                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 signal2 {
  47                         label = "tp-link:blue:signal2";
  48                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 signal3 {
  52                         label = "tp-link:blue:signal3";
  53                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 signal4 {
  57                         label = "tp-link:blue:signal4";
  58                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 led_signal5: signal5 {
  62                         label = "tp-link:blue:signal5";
  63                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wlan {
  67                         label = "tp-link:blue:wlan";
  68                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  69                         linux,default-trigger = "phy0tpt";
  70                 };
  71         };
  72
  73         keys {
  74                 compatible = "gpio-keys";
  75
  76                 reset {
  77                         label = "Reset button";
  78                         linux,code = <KEY_RESTART>;
  79                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  80                 };
  81
  82                 wps {
  83                         label = "WPS button";
  84                         linux,code = <KEY_RFKILL>;
  85                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  86                 };
  87         };
  88 };
  89
  90 &gpio {
  91         led_enable {
  92                 gpio-hog;
  93                 gpios = <15 GPIO_ACTIVE_HIGH>;
  94                 line-name = "tp-link:power:led";
  95                 output-high;
  96         };
  97 };
  98
  99 &uart {
 100         status = "okay";
 101 };
 102
 103 &spi {
 104         status = "okay";
 105
 106         num-cs = <1>;
 107
 108         flash@0 {
 109                 #address-cells = <1>;
 110                 #size-cells = <1>;
 111                 compatible = "jedec,spi-nor";
 112                 reg = <0>;
 113                 spi-max-frequency = <25000000>;
 114
 115                 partitions {
 116                         compatible = "fixed-partitions";
 117                         #address-cells = <1>;
 118                         #size-cells = <1>;
 119
 120                         partition@0 {
 121                                 label = "u-boot";
 122                                 reg = <0x000000 0x020000>;
 123                                 read-only;
 124                         };
 125
 126                         partition@20000 {
 127                                 label = "firmware";
 128                                 reg = <0x020000 0x390000>;
 129                                 compatible = "tplink,firmware";
 130                         };
 131
 132                         config: partition@3b0000 {
 133                                 label = "config";
 134                                 reg = <0x3b0000 0x040000>;
 135                                 read-only;
 136                         };
 137
 138                         art: partition@3f0000 {
 139                                 label = "art";
 140                                 reg = <0x3f0000 0x010000>;
 141                                 read-only;
 142                         };
 143                 };
 144         };
 145 };
 146
 147 &wmac {
 148         status = "okay";
 149
 150         mtd-cal-data = <&art 0x1000>;
 151         mtd-mac-address = <&config 0x10008>;
 152 };
 153
 154 &eth0 {
 155         status = "okay";
 156
 157         phy-handle = <&swphy4>;
 158
 159         mtd-mac-address = <&config 0x10008>;
 160 };
 161
 162 &eth1 {
 163         compatible = "syscon", "simple-mfd";
 164 };