target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 label-mac-device = &wmac;
  16         };
  17
  18         gpio_leds: leds {
  19                 compatible = "gpio-leds";
  20
  21                 wifi {
  22                         label = "tp-link:green:wlan";
  23                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  24                         linux,default-trigger = "phy0tpt";
  25                 };
  26
  27                 qss_led: qss {
  28                         label = "tp-link:green:qss";
  29                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 wan {
  33                         label = "tp-link:green:wan";
  34                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 lan1 {
  38                         label = "tp-link:green:lan1";
  39                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 lan2 {
  43                         label = "tp-link:green:lan2";
  44                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 lan3 {
  48                         label = "tp-link:green:lan3";
  49                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 lan4 {
  53                         label = "tp-link:green:lan4";
  54                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57
  58         keys {
  59                 compatible = "gpio-keys";
  60
  61                 reset {
  62                         label = "Reset button";
  63                         linux,code = <KEY_RESTART>;
  64                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  65                         debounce-interval = <60>;
  66                 };
  67
  68                 rfkill {
  69                         label = "RFKILL button";
  70                         linux,code = <KEY_RFKILL>;
  71                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  72                         debounce-interval = <60>;
  73                 };
  74         };
  75 };
  76
  77 &uart {
  78         status = "okay";
  79 };
  80
  81 &spi {
  82         status = "okay";
  83         num-cs = <1>;
  84
  85         flash@0 {
  86                 compatible = "jedec,spi-nor";
  87                 reg = <0>;
  88                 spi-max-frequency = <25000000>;
  89
  90                 partitions {
  91                         compatible = "fixed-partitions";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94
  95                         uboot:  partition@0 {
  96                                 label = "u-boot";
  97                                 reg = <0x000000 0x020000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@20000 {
 102                                 compatible = "tplink,firmware";
 103                                 label = "firmware";
 104                                 reg = <0x020000 0x3d0000>;
 105                         };
 106
 107                         art: partition@3f0000 {
 108                                 label = "art";
 109                                 reg = <0x3f0000 0x010000>;
 110                                 read-only;
 111                         };
 112                 };
 113         };
 114 };
 115
 116 &eth1 {
 117         mtd-mac-address = <&uboot 0x1fc00>;
 118 };
 119
 120 &eth0 {
 121         status = "okay";
 122         phy-handle = <&swphy4>;
 123
 124         mtd-mac-address = <&uboot 0x1fc00>;
 125         mtd-mac-address-increment = <1>;
 126 };
 127
 128 &wmac {
 129         status = "okay";
 130         mtd-cal-data = <&art 0x1000>;
 131         mtd-mac-address = <&uboot 0x1fc00>;
 132 };