target/linux/ath79/dts/qca9533_ubnt_acb-isp.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "ubnt,acb-isp", "qca,qca9533";
  11         model = "Ubiquiti airCube ISP";
  12
  13         aliases {
  14                 label-mac-device = &wmac;
  15         };
  16
  17         keys {
  18                 compatible = "gpio-keys";
  19
  20                 reset {
  21                         label = "reset";
  22                         linux,code = <KEY_RESTART>;
  23                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  24                         debounce-interval = <60>;
  25                 };
  26         };
  27 };
  28
  29 &spi {
  30         status = "okay";
  31         num-cs = <1>;
  32
  33         flash@0 {
  34                 compatible = "jedec,spi-nor";
  35                 reg = <0>;
  36                 spi-max-frequency = <25000000>;
  37
  38                 partitions {
  39                         compatible = "fixed-partitions";
  40                         #address-cells = <1>;
  41                         #size-cells = <1>;
  42
  43                         partition@0 {
  44                                 label = "u-boot";
  45                                 reg = <0x000000 0x040000>;
  46                                 read-only;
  47                         };
  48
  49                         partition@40000 {
  50                                 label = "u-boot-env";
  51                                 reg = <0x040000 0x010000>;
  52                                 read-only;
  53                         };
  54
  55                         partition@50000 {
  56                                 compatible = "denx,uimage";
  57                                 label = "firmware";
  58                                 reg = <0x050000 0xf60000>;
  59                         };
  60
  61                         partition@fb0000 {
  62                                 label = "cfg";
  63                                 reg = <0xfb0000 0x040000>;
  64                                 read-only;
  65                         };
  66
  67                         eeprom: partition@ff0000 {
  68                                 label = "EEPROM";
  69                                 reg = <0xff0000 0x010000>;
  70                                 read-only;
  71                         };
  72                 };
  73         };
  74 };
  75
  76 &uart {
  77         status = "okay";
  78 };
  79
  80 &eth0 {
  81         status = "okay";
  82         mtd-mac-address = <&eeprom 0x0>;
  83         phy-handle = <&swphy4>;
  84 };
  85
  86 &eth1 {
  87         status = "okay";
  88         mtd-mac-address = <&eeprom 0x6>;
  89
  90         gmac-config {
  91                 device = <&gmac>;
  92         };
  93 };
  94
  95 &wmac {
  96         status = "okay";
  97         mtd-cal-data = <&eeprom 0x1000>;
  98         mtd-mac-address = <&eeprom 0x1002>;
  99 };