target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &led_system;
  16                 led-failsafe = &led_system;
  17                 led-running = &led_system;
  18                 led-upgrade = &led_system;
  19                 label-mac-device = &eth1;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 led_system: system {
  26                         label = "tp-link:blue:system";
  27                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  28                 };
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys";
  33
  34                 reset {
  35                         label = "Reset button";
  36                         linux,code = <KEY_RESTART>;
  37                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  38                         debounce-interval = <60>;
  39                 };
  40
  41                 switch_b0 {
  42                         label = "switch_b0";
  43                         linux,input-type = <EV_SW>;
  44                         linux,code = <BTN_0>;
  45                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  46                         debounce-interval = <60>;
  47                 };
  48
  49                 switch_b1 {
  50                         label = "switch_b1";
  51                         linux,input-type = <EV_SW>;
  52                         linux,code = <BTN_1>;
  53                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  54                         debounce-interval = <60>;
  55                 };
  56         };
  57 };
  58
  59 &uart {
  60         status = "okay";
  61 };
  62
  63 &spi {
  64         status = "okay";
  65
  66         num-cs = <1>;
  67
  68         flash@0 {
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <25000000>;
  72
  73                 partitions {
  74                         compatible = "fixed-partitions";
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77
  78                         uboot:  partition@0 {
  79                                 label = "u-boot";
  80                                 reg = <0x000000 0x020000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@20000 {
  85                                 compatible = "tplink,firmware";
  86                                 label = "firmware";
  87                                 reg = <0x020000 0x7d0000>;
  88                         };
  89
  90                         art: partition@7f0000 {
  91                                 label = "art";
  92                                 reg = <0x7f0000 0x010000>;
  93                                 read-only;
  94                         };
  95                 };
  96         };
  97 };
  98
  99 &eth1 {
 100         mtd-mac-address = <&uboot 0x1fc00>;
 101 };
 102
 103 &eth0 {
 104         status = "okay";
 105
 106         phy-handle = <&swphy4>;
 107
 108         mtd-mac-address = <&uboot 0x1fc00>;
 109         mtd-mac-address-increment = <1>;
 110 };
 111
 112 &wmac {
 113         status = "okay";
 114
 115         mtd-cal-data = <&art 0x1000>;
 116         mtd-mac-address = <&uboot 0x1fc00>;
 117 };