target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca9556_avm_fritz-repeater.dtsi"
   4
   5 / {
   6         compatible = "avm,fritzdvbc", "qca,qca9556";
   7         model = "AVM FRITZ!WLAN Repeater DVB-C";
   8
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14         };
  15
  16         led_spi {
  17                 compatible = "spi-gpio";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20
  21                 sck-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  22                 mosi-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  23                 num-chipselects = <0>;
  24
  25                 spi_gpio: led_gpio@0 {
  26                         compatible = "fairchild,74hc595";
  27                         reg = <0>;
  28                         gpio-controller;
  29                         #gpio-cells = <2>;
  30                         registers-number = <2>;
  31                         spi-max-frequency = <10000000>;
  32
  33                         gpio_latch_bit {
  34                                 gpio-hog;
  35                                 gpios = <16 GPIO_ACTIVE_HIGH>;
  36                                 output-high;
  37                                 line-name = "gpio-latch-bit";
  38                         };
  39                 };
  40         };
  41
  42         /*
  43          * GPIO pins 100 or greater in the vendor GPL dump are redirected
  44          * to the shift register.
  45          * So OEM source pin 100 becomes 0 on the SR and so forth.
  46          */
  47         leds {
  48                 compatible = "gpio-leds";
  49
  50                 led_power: power {
  51                         label = "green:power";
  52                         gpios = <&spi_gpio 6 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wlan {
  56                         label = "green:wlan";
  57                         gpios = <&spi_gpio 7 GPIO_ACTIVE_LOW>;
  58                         linux,default-trigger = "phy1tpt";
  59                 };
  60
  61                 tv {
  62                         label = "green:tv";
  63                         gpios = <&spi_gpio 5 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 rssihigh {
  67                         label = "green:rssihigh";
  68                         gpios = <&spi_gpio 1 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 rssimediumhigh {
  72                         label = "green:rssimediumhigh";
  73                         gpios = <&spi_gpio 2 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 rssimedium {
  77                         label = "green:rssimedium";
  78                         gpios = <&spi_gpio 3 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 rssimediumlow {
  82                         label = "green:rssimediumlow";
  83                         gpios = <&spi_gpio 4 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 rssilow {
  87                         label = "green:rssilow";
  88                         gpios = <&spi_gpio 0 GPIO_ACTIVE_LOW>;
  89                 };
  90         };
  91 };
  92
  93 &pcie0 {
  94         status = "okay";
  95 };
  96
  97 &gpio {
  98         reset-pcie-ep {
  99                 gpio-hog;
 100                 gpios = <109 GPIO_ACTIVE_HIGH>;
 101                 output-high;
 102                 line-name = "PCIE EP reset";
 103         };
 104
 105         reset-pcie-bus {
 106                 gpio-hog;
 107                 gpios = <110 GPIO_ACTIVE_HIGH>;
 108                 output-high;
 109                 line-name = "PCIE Bus reset";
 110         };
 111 };