target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca9557.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200n8";
  18         };
  19
  20         leds: leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power: power {
  24                         label = "iodata:green:power";
  25                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 eco {
  30                         label = "iodata:green:eco";
  31                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 wlan5g {
  35                         label = "iodata:green:wlan5g";
  36                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  37                         linux,default-trigger = "phy0tpt";
  38                 };
  39
  40                 wlan2g {
  41                         label = "iodata:green:wlan2g";
  42                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  43                         linux,default-trigger = "phy1tpt";
  44                 };
  45
  46                 notification {
  47                         label = "iodata:amber:notification";
  48                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  49                 };
  50         };
  51
  52         keys: keys {
  53                 compatible = "gpio-keys";
  54
  55                 eco {
  56                         label = "eco";
  57                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  58                         linux,code = <BTN_1>;
  59                         debounce-interval = <60>;
  60                 };
  61
  62                 auto {
  63                         label = "auto";
  64                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  65                         linux,code = <BTN_0>;
  66                         linux,input-type = <EV_SW>;
  67                         debounce-interval = <60>;
  68                 };
  69
  70                 wps {
  71                         label = "wps";
  72                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_WPS_BUTTON>;
  74                         debounce-interval = <60>;
  75                 };
  76
  77                 reset {
  78                         label = "reset";
  79                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  80                         linux,code = <KEY_RESTART>;
  81                         debounce-interval = <60>;
  82                 };
  83
  84                 router {
  85                         label = "router";
  86                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  87                         linux,code = <BTN_0>;
  88                         linux,input-type = <EV_SW>;
  89                         debounce-interval = <60>;
  90                 };
  91         };
  92 };
  93
  94 &spi {
  95         status = "okay";
  96
  97         num-cs = <1>;
  98
  99         flash@0 {
 100                 compatible = "jedec,spi-nor";
 101                 reg = <0>;
 102                 spi-max-frequency = <25000000>;
 103
 104                 partitions {
 105                         compatible = "fixed-partitions";
 106                         #address-cells = <1>;
 107                         #size-cells = <1>;
 108
 109                         partition@0 {
 110                                 label = "u-boot";
 111                                 reg = <0x000000 0x030000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@30000 {
 116                                 label = "u-boot-env";
 117                                 reg = <0x030000 0x010000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@40000 {
 122                                 compatible = "denx,uimage";
 123                                 label = "firmware";
 124                                 reg = <0x040000 0xe50000>;
 125                         };
 126
 127                         partition@e90000 {
 128                                 label = "manufacture";
 129                                 reg = <0xe90000 0x100000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@f90000 {
 134                                 label = "backup";
 135                                 reg = <0xf90000 0x010000>;
 136                                 read-only;
 137                         };
 138
 139                         partition@fa0000 {
 140                                 label = "storage";
 141                                 reg = <0xfa0000 0x050000>;
 142                                 read-only;
 143                         };
 144
 145                         art: partition@ff0000 {
 146                                 label = "art";
 147                                 reg = <0xff0000 0x010000>;
 148                                 read-only;
 149                         };
 150                 };
 151         };
 152 };
 153
 154 &mdio0 {
 155         status = "okay";
 156
 157         phy0: ethernet-phy@0 {
 158                 reg = <0>;
 159
 160                 qca,ar8327-initvals = <
 161                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 162                         0x7c 0x0000007e /* PORT0_STATUS */
 163                 >;
 164         };
 165 };
 166
 167 &eth0 {
 168         status = "okay";
 169
 170         pll-data = <0xa6000000 0x00000101 0x00001616>;
 171         phy-handle = <&phy0>;
 172 };
 173
 174 &pcie1 {
 175         status = "okay";
 176
 177         wifi@0,0 {
 178                 compatible = "pci168c,003c";
 179                 reg = <0x0000 0 0 0 0>;
 180         };
 181 };
 182
 183 &uart {
 184         status = "okay";
 185 };
 186
 187 &usb_phy0 {
 188         status = "okay";
 189 };
 190
 191 &usb0 {
 192         status = "okay";
 193 };
 194
 195 &wmac {
 196         status = "okay";
 197
 198         qca,no-eeprom;
 199 };