target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x_senao_loader.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "allnet,all-wap02860ac", "qca,qca9558";
  10         model = "ALLNET ALL-WAP02860AC";
  11
  12         aliases {
  13                 label-mac-device = &eth0;
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  26                         debounce-interval = <60>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33
  34                 led_power: power {
  35                         label = "amber:power";
  36                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  37                         default-state = "on";
  38                 };
  39
  40                 wlan2g {
  41                         label = "blue:wlan2g";
  42                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  43                         linux,default-trigger = "phy1tpt";
  44                 };
  45
  46                 wlan5g {
  47                         label = "green:wlan5g";
  48                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  49                         linux,default-trigger = "phy0tpt";
  50                 };
  51
  52                 wps {
  53                         label = "blue:wps";
  54                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57 };
  58
  59 &eth0 {
  60         status = "okay";
  61
  62         mtd-mac-address = <&art 0x0>;
  63
  64         phy-handle = <&phy5>;
  65         phy-mode = "rgmii-id";
  66
  67         pll-data = <0x82000000 0x80000101 0x80001313>;
  68 };
  69
  70 &mdio0 {
  71         status = "okay";
  72
  73         phy5: ethernet-phy@5 {
  74                 reg = <5>;
  75                 eee-broken-100tx;
  76                 eee-broken-1000t;
  77         };
  78 };
  79
  80 &partitions {
  81         art: partition@ff0000 {
  82                 label = "art";
  83                 reg = <0xff0000 0x010000>;
  84                 read-only;
  85         };
  86 };
  87
  88 &wmac {
  89         status = "okay";
  90
  91         mtd-cal-data = <&art 0x1000>;
  92         mtd-mac-address = <&art 0x0>;
  93         mac-address-increment = <1>;
  94         qca-no-eeprom;
  95 };