target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "librerouter,librerouter-v1", "qca,qca9558";
  10         model = "LibreRouter v1";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_system: system {
  23                         label = "green:system";
  24                         gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
  25                         default-state = "on";
  26                 };
  27
  28                 wifi_green {
  29                         label = "green:wlan2g";
  30                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  31                         linux,default-trigger = "phy0tpt";
  32                 };
  33
  34                 status_blue {
  35                         label = "blue:status";
  36                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 reset {
  44                         label = "Reset";
  45                         linux,code = <KEY_RESTART>;
  46                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  47                         debounce-interval = <60>;
  48                 };
  49         };
  50
  51         watchdog {
  52                 compatible = "linux,wdt-gpio";
  53                 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  54                 hw_algo = "toggle";
  55                 hw_margin_ms = <1000>;
  56                 always-running;
  57         };
  58 };
  59
  60 &pcie0 {
  61         status = "okay";
  62
  63         wifi@0,0 {
  64                 compatible = "pci168c,0033";
  65                 reg = <0x0000 0 0 0 0>;
  66         };
  67 };
  68
  69 &pcie1 {
  70         status = "okay";
  71
  72         wifi@0,0 {
  73                 compatible = "pci168c,0033";
  74                 reg = <0x0000 0 0 0 0>;
  75         };
  76 };
  77
  78 &usb_phy0 {
  79         status = "okay";
  80 };
  81
  82 &usb0 {
  83         #address-cells = <1>;
  84         #size-cells = <0>;
  85         status = "okay";
  86 };
  87
  88 &usb_phy1 {
  89         status = "okay";
  90 };
  91
  92 &usb1 {
  93         #address-cells = <1>;
  94         #size-cells = <0>;
  95         status = "okay";
  96 };
  97
  98 &spi {
  99         status = "okay";
 100
 101         flash@0 {
 102                 compatible = "jedec,spi-nor";
 103                 reg = <0>;
 104                 spi-max-frequency = <25000000>;
 105
 106                 partitions {
 107                         compatible = "fixed-partitions";
 108                         #address-cells = <1>;
 109                         #size-cells = <1>;
 110
 111                         partition@0 {
 112                                 label = "u-boot";
 113                                 reg = <0x000000 0x040000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@40000 {
 118                                 label = "u-boot-env";
 119                                 reg = <0x040000 0x010000>;
 120                         };
 121
 122                         partition@50000 {
 123                                 compatible = "denx,uimage";
 124                                 label = "firmware";
 125                                 reg = <0x050000 0x7c0000>;
 126                         };
 127
 128                         partition@810000 {
 129                                 label = "fw2";
 130                                 reg = <0x810000 0x7d0000>;
 131                         };
 132
 133                         partition@fd0000 {
 134                                 label = "res";
 135                                 reg = <0xfd0000 0x20000>;
 136                         };
 137
 138                         art: partition@ff0000 {
 139                                 label = "art";
 140                                 reg = <0xff0000 0x010000>;
 141                                 read-only;
 142                         };
 143                 };
 144         };
 145 };
 146
 147 &mdio0 {
 148         status = "okay";
 149
 150         phy0: ethernet-phy@0 {
 151                 reg = <0>;
 152                 qca,ar8327-initvals = <
 153                         0x04 0x87600000 /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, rx_delay 10 */
 154                         0x0c 0x00000080 /* PORT6: SGMII */
 155                         0x10 0x81000080 /* POWER_ON_STRAP: LED open drain, SerDes auto-neg disabled */
 156                         0x50 0xcf37cf37 /* LED_CTRL0 */
 157                         0x54 0xcf37cf37 /* LED_CTRL1 */
 158                         0x58 0xcf37cf37 /* LED_CTRL2 */
 159                         0x5c 0x0        /* LED_CTRL3 */
 160                         0x7c 0x0000007e /* PORT0_STATUS */
 161                         0x94 0x0000007e /* PORT6 STATUS */
 162                 >;
 163         };
 164 };
 165
 166 &eth0 {
 167         status = "okay";
 168
 169         pll-data = <0xa6000000 0x00000101 0x00001616>;
 170         mtd-mac-address = <&art 0x0>;
 171
 172         phy-handle = <&phy0>;
 173 };
 174
 175 &eth1 {
 176         status = "okay";
 177
 178         pll-data = <0x03000101 0x00000101 0x00001616>;
 179         mtd-mac-address = <&art 0x6>;
 180
 181         fixed-link {
 182                 speed = <1000>;
 183                 full-duplex;
 184         };
 185 };
 186
 187 &wmac {
 188         status = "okay";
 189
 190         mtd-cal-data = <&art 0x1000>;
 191         mtd-mac-address = <&art 0xc>;
 192 };