target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14                 label-mac-device = &eth0;
  15         };
  16
  17         keys {
  18                 compatible = "gpio-keys";
  19
  20                 reset {
  21                         label = "Reset button";
  22                         linux,code = <KEY_RESTART>;
  23                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  24                         debounce-interval = <60>;
  25                 };
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30
  31                 wlan {
  32                         label = "green:wlan";
  33                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  34                         linux,default-trigger = "phy0tpt";
  35                 };
  36
  37                 led_system: system {
  38                         label = "green:system";
  39                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  40                         default-state = "on";
  41                 };
  42
  43                 sig1 {
  44                         label = "green:sig1";
  45                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 sig2 {
  49                         label = "green:sig2";
  50                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  51                 };
  52         };
  53 };
  54
  55 &pcie0 {
  56         status = "okay";
  57 };
  58
  59 &pcie1 {
  60         status = "okay";
  61 };
  62
  63 &spi {
  64         status = "okay";
  65
  66         flash@0 {
  67                 compatible = "jedec,spi-nor";
  68                 reg = <0>;
  69                 spi-max-frequency = <25000000>;
  70
  71                 partitions: partitions {
  72                         compatible = "fixed-partitions";
  73                         #address-cells = <1>;
  74                         #size-cells = <1>;
  75
  76                         partition@0 {
  77                                 label = "u-boot";
  78                                 reg = <0x000000 0x040000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@40000 {
  83                                 label = "u-boot-env";
  84                                 reg = <0x040000 0x010000>;
  85                                 read-only;
  86                         };
  87
  88                         pridata: partition@50000 {
  89                                 label = "pri-data";
  90                                 reg = <0x050000 0x010000>;
  91                                 read-only;
  92                         };
  93
  94                         art: partition@60000 {
  95                                 label = "art";
  96                                 reg = <0x060000 0x010000>;
  97                                 read-only;
  98                         };
  99                 };
 100         };
 101 };
 102
 103 &mdio0 {
 104         status = "okay";
 105
 106         phy0: ethernet-phy@0 {
 107                 reg = <0>;
 108
 109                 qca,ar8327-initvals = <
 110                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 111                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 112                         0x10 0x81000080 /* POWER_ON_STRAP */
 113                         0x50 0xcc35cc35 /* LED_CTRL0 */
 114                         0x54 0xca35ca35 /* LED_CTRL1 */
 115                         0x58 0xc935c935 /* LED_CTRL2 */
 116                         0x5c 0x03ffff00 /* LED_CTRL3 */
 117                         0x7c 0x0000007e /* PORT0_STATUS */
 118                         0x94 0x0000007e /* PORT6 STATUS */
 119                 >;
 120         };
 121 };
 122
 123 &eth0 {
 124         status = "okay";
 125
 126         pll-data = <0x56000000 0x00000101 0x00001616>;
 127
 128         phy-handle = <&phy0>;
 129
 130         mtd-mac-address = <&pridata 0x400>;
 131         mtd-mac-address-increment = <1>;
 132 };
 133
 134 &eth1 {
 135         status = "okay";
 136
 137         pll-data = <0x03000101 0x00000101 0x00001616>;
 138
 139         mtd-mac-address = <&pridata 0x400>;
 140
 141         fixed-link {
 142                 speed = <1000>;
 143                 full-duplex;
 144         };
 145 };
 146
 147 &uart {
 148         status = "okay";
 149 };
 150
 151 &usb_phy0 {
 152         status = "okay";
 153 };
 154
 155 &usb0 {
 156         status = "okay";
 157 };
 158
 159 &usb_phy1 {
 160         status = "okay";
 161 };
 162
 163 &usb1 {
 164         status = "okay";
 165 };
 166
 167 &wmac {
 168         status = "okay";
 169
 170         mtd-cal-data = <&art 0x1000>;
 171 };