target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         memory@0 {
  11                 device_type = "memory";
  12                 reg = <0x0 0x8000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8";
  17         };
  18
  19         aliases {
  20                 led-status = &system;
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 system: system {
  27                         label = "tp-link:green:system";
  28                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  29                         default-state = "on";
  30                 };
  31
  32                 usb1 {
  33                         label = "tp-link:green:usb1";
  34                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  35                         default-state = "off";
  36                         trigger-sources = <&hub_port0>;
  37                         linux,default-trigger = "usbport";
  38                 };
  39
  40                 usb2 {
  41                         label = "tp-link:green:usb2";
  42                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  43                         default-state = "off";
  44                         trigger-sources = <&hub_port1>;
  45                         linux,default-trigger = "usbport";
  46                 };
  47
  48                 wlan2g {
  49                         label = "tp-link:green:wlan2g";
  50                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  51                         default-state = "off";
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54
  55                 qss {
  56                         label = "tp-link:green:qss";
  57                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  58                         default-state = "off";
  59                 };
  60
  61                 wlan5g {
  62                         label = "tp-link:green:wlan5g";
  63                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  64                         default-state = "off";
  65                         linux,default-trigger = "phy0tpt";
  66                 };
  67         };
  68
  69         keys {
  70                 compatible = "gpio-keys";
  71                 #address-cells = <1>;
  72                 #size-cells = <0>;
  73
  74                 reset {
  75                         label = "Reset button";
  76                         linux,code = <KEY_RESTART>;
  77                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  78                         debounce-interval = <60>;
  79                 };
  80
  81                 rfkill: wifi {
  82                         linux,code = <KEY_RFKILL>;
  83                         linux,input-type = <EV_SW>;
  84                         debounce-interval = <60>;
  85                 };
  86         };
  87
  88         gpio-export {
  89                 compatible = "gpio-export";
  90                 #size-cells = <0>;
  91
  92                 gpio_usb1_power {
  93                         gpio-export,name = "tp-link:power:usb1";
  94                         gpio-export,output = <1>;
  95                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  96                 };
  97
  98                 gpio_usb2_power {
  99                         gpio-export,name = "tp-link:power:usb2";
 100                         gpio-export,output = <1>;
 101                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
 102                 };
 103
 104         };
 105 };
 106
 107 &pcie1 {
 108         status = "okay";
 109 };
 110
 111 &uart {
 112         status = "okay";
 113 };
 114
 115 &gpio {
 116         status = "okay";
 117 };
 118
 119 &usb_phy0 {
 120         status = "okay";
 121 };
 122
 123 &usb0 {
 124         status = "okay";
 125
 126         hub_port0: port@1 {
 127                 reg = <1>;
 128                 #trigger-source-cells = <0>;
 129         };
 130 };
 131
 132 &usb_phy1 {
 133         status = "okay";
 134 };
 135
 136 &usb1 {
 137         status = "okay";
 138
 139         hub_port1: port@1 {
 140                 reg = <1>;
 141                 #trigger-source-cells = <0>;
 142         };
 143 };
 144
 145 &spi {
 146         status = "okay";
 147         num-cs = <1>;
 148
 149         flash@0 {
 150                 #address-cells = <1>;
 151                 #size-cells = <1>;
 152                 compatible = "jedec,spi-nor";
 153                 reg = <0>;
 154                 spi-max-frequency = <25000000>;
 155
 156                 partitions {
 157                         compatible = "fixed-partitions";
 158                         #address-cells = <1>;
 159                         #size-cells = <1>;
 160
 161                         uboot: partition@0 {
 162                                 label = "u-boot";
 163                                 reg = <0x000000 0x020000>;
 164                                 read-only;
 165                         };
 166
 167                         partition@20000 {
 168                                 label = "firmware";
 169                                 reg = <0x020000 0xfd0000>;
 170                         };
 171
 172                         art: partition@ff0000 {
 173                                 label = "art";
 174                                 reg = <0xff0000 0x010000>;
 175                                 read-only;
 176                         };
 177                 };
 178         };
 179 };
 180
 181 &mdio0 {
 182         status = "okay";
 183
 184         phy0: ethernet-phy@0 {
 185                 reg = <0>;
 186
 187                 qca,ar8327-initvals = <
 188                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 189                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 190                         0x50 0xc737c737 /* LED_CTRL0 */
 191                         0x54 0x00000000 /* LED_CTRL1 */
 192                         0x58 0x00000000 /* LED_CTRL2 */
 193                         0x5c 0x0030c300 /* LED_CTRL3 */
 194                         0x7c 0x0000007e /* PORT0_STATUS */
 195                         0x94 0x0000007e /* PORT6 STATUS */
 196                         >;
 197         };
 198 };
 199
 200 &mdio1 {
 201         status = "okay";
 202
 203         phy1: ethernet-phy@1 {
 204                 reg = <1>;
 205         };
 206 };
 207
 208 &eth0 {
 209         status = "okay";
 210
 211         mtd-mac-address = <&uboot 0x1fc00>;
 212         mtd-mac-address-increment = <1>;
 213         phy-handle = <&phy0>;
 214 };
 215
 216 &eth1 {
 217         status = "okay";
 218
 219         mtd-mac-address = <&uboot 0x1fc00>;
 220         phy-handle = <&phy1>;
 221
 222         fixed-link {
 223                 speed = <1000>;
 224                 full-duplex;
 225         };
 226 };
 227
 228 &wmac {
 229         status = "okay";
 230         mtd-cal-data = <&art 0x1000>;
 231         mtd-mac-address = <&uboot 0x1fc00>;
 232 };