target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &led_power;
  16                 led-failsafe = &led_power;
  17                 led-running = &led_power;
  18                 led-upgrade = &led_power;
  19                 mdio-gpio0 = &mdio2;
  20                 label-mac-device = &eth0;
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_power: power {
  27                         label = "tp-link:blue:power";
  28                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 wlan2g {
  32                         label = "tp-link:blue:wlan2g";
  33                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  34                         linux,default-trigger = "phy1tpt";
  35                 };
  36
  37                 wlan5g {
  38                         label = "tp-link:blue:wlan5g";
  39                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "phy0tpt";
  41                 };
  42
  43                 lan_link {
  44                         label = "tp-link:green:lan_link";
  45                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 lan_data {
  49                         label = "tp-link:green:lan_data";
  50                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wps_blue {
  54                         label = "tp-link:blue:wps";
  55                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  56                 };
  57
  58                 wps_red {
  59                         label = "tp-link:red:wps";
  60                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  61                 };
  62         };
  63
  64         keys {
  65                 compatible = "gpio-keys";
  66
  67                 reset {
  68                         label = "Reset button";
  69                         linux,code = <KEY_RESTART>;
  70                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  71                         debounce-interval = <60>;
  72                 };
  73
  74                 leds {
  75                         label = "LED control button";
  76                         linux,code = <BTN_0>;
  77                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  78                         debounce-interval = <60>;
  79                 };
  80
  81                 wps {
  82                         label = "WPS button";
  83                         linux,code = <KEY_WPS_BUTTON>;
  84                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  85                         debounce-interval = <60>;
  86                 };
  87         };
  88
  89         mdio2: mdio {
  90                 compatible = "virtual,mdio-gpio";
  91
  92                 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
  93                         <&gpio 1 GPIO_ACTIVE_HIGH>; /* MDIO */
  94                 #address-cells = <1>;
  95                 #size-cells = <0>;
  96
  97                 phy0: ethernet-phy@4 {
  98                         reg = <4>;
  99                         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 100                 };
 101         };
 102 };
 103
 104 &pcie0 {
 105         status = "okay";
 106 };
 107
 108 &uart {
 109         status = "okay";
 110 };
 111
 112 &gpio {
 113         status = "okay";
 114 };
 115
 116 &spi {
 117         status = "okay";
 118         num-cs = <1>;
 119
 120         flash@0 {
 121                 compatible = "jedec,spi-nor";
 122                 reg = <0>;
 123                 spi-max-frequency = <25000000>;
 124
 125                 partitions {
 126                         compatible = "fixed-partitions";
 127                         #address-cells = <1>;
 128                         #size-cells = <1>;
 129
 130                         partition@0 {
 131                                 label = "u-boot";
 132                                 reg = <0x000000 0x020000>;
 133                                 read-only;
 134                         };
 135
 136                         partition@20000 {
 137                                 compatible = "tplink,firmware";
 138                                 label = "firmware";
 139                                 reg = <0x020000 0x5e0000>;
 140                         };
 141
 142                         partition@600000 {
 143                                 label = "partition-table";
 144                                 reg = <0x600000 0x010000>;
 145                                 read-only;
 146                         };
 147
 148                         info: partition@610000 {
 149                                 label = "info";
 150                                 reg = <0x610000 0x020000>;
 151                                 read-only;
 152                         };
 153
 154                         partition@630000 {
 155                                 label = "config";
 156                                 reg = <0x630000 0x1c0000>;
 157                                 read-only;
 158                         };
 159
 160                         art: partition@7f0000 {
 161                                 label = "art";
 162                                 reg = <0x7f0000 0x010000>;
 163                                 read-only;
 164                         };
 165                 };
 166         };
 167 };
 168
 169 &eth0 {
 170         status = "okay";
 171         mtd-mac-address = <&info 0x8>;
 172         pll-data = <0xa6000000 0x00000101 0x00001616>;
 173         phy-handle = <&phy0>;
 174 };
 175
 176 &wmac {
 177         status = "okay";
 178         mtd-cal-data = <&art 0x1000>;
 179         mtd-mac-address = <&info 0x8>;
 180         mtd-mac-address-increment = <(-1)>;
 181 };