target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wdr4900-v2", "qca,qca9558";
  11         model = "TP-Link TL-WDR4900 v2";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_system;
  19                 led-failsafe = &led_system;
  20                 led-running = &led_system;
  21                 led-upgrade = &led_system;
  22                 label-mac-device = &eth1;
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 led_system: system {
  29                         label = "tp-link:blue:system";
  30                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  31                         default-state = "on";
  32                 };
  33
  34                 usb1 {
  35                         label = "tp-link:green:usb1";
  36                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  37                         trigger-sources = <&hub_port1>;
  38                         linux,default-trigger = "usbport";
  39                 };
  40
  41                 usb2 {
  42                         label = "tp-link:green:usb2";
  43                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  44                         trigger-sources = <&hub_port0>;
  45                         linux,default-trigger = "usbport";
  46                 };
  47
  48                 wlan2g {
  49                         label = "tp-link:blue:wlan2g";
  50                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  51                         linux,default-trigger = "phy0tpt";
  52                 };
  53
  54                 qss {
  55                         label = "tp-link:blue:qss";
  56                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  57                 };
  58         };
  59
  60          ath9k-leds {
  61                 compatible = "gpio-leds";
  62
  63                 wlan5g {
  64                         label = "tp-link:blue:wlan5g";
  65                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  66                         linux,default-trigger = "phy1tpt";
  67                 };
  68         };
  69
  70         keys {
  71                 compatible = "gpio-keys";
  72
  73                 reset {
  74                         label = "Reset button";
  75                         linux,code = <KEY_RESTART>;
  76                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  77                         debounce-interval = <60>;
  78                 };
  79         };
  80
  81         gpio-export {
  82                 compatible = "gpio-export";
  83
  84                 gpio_usb1_power {
  85                         gpio-export,name = "tp-link:power:usb1";
  86                         gpio-export,output = <1>;
  87                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  88                 };
  89
  90                 gpio_usb2_power {
  91                         gpio-export,name = "tp-link:power:usb2";
  92                         gpio-export,output = <1>;
  93                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  94                 };
  95         };
  96 };
  97
  98 &pcie1 {
  99         status = "okay";
 100
 101         ath9k: wifi@0,0 {
 102                 compatible = "pci168c,0033";
 103                 reg = <0x0000 0 0 0 0>;
 104                 mtd-mac-address = <&uboot 0x1fc00>;
 105                 mtd-mac-address-increment = <(-2)>;
 106                 qca,no-eeprom;
 107                 #gpio-cells = <2>;
 108                 gpio-controller;
 109         };
 110 };
 111
 112 &uart {
 113         status = "okay";
 114 };
 115
 116 &usb_phy0 {
 117         status = "okay";
 118 };
 119
 120 &usb0 {
 121         #address-cells = <1>;
 122         #size-cells = <0>;
 123         status = "okay";
 124
 125         hub_port0: port@1 {
 126                 reg = <1>;
 127                 #trigger-source-cells = <0>;
 128         };
 129 };
 130
 131 &usb_phy1 {
 132         status = "okay";
 133 };
 134
 135 &usb1 {
 136         #address-cells = <1>;
 137         #size-cells = <0>;
 138         status = "okay";
 139
 140         hub_port1: port@1 {
 141                 reg = <1>;
 142                 #trigger-source-cells = <0>;
 143         };
 144 };
 145
 146 &spi {
 147         status = "okay";
 148
 149         num-cs = <1>;
 150
 151         flash@0 {
 152                 compatible = "jedec,spi-nor";
 153                 reg = <0>;
 154                 spi-max-frequency = <25000000>;
 155
 156                 partitions {
 157                         compatible = "fixed-partitions";
 158                         #address-cells = <1>;
 159                         #size-cells = <1>;
 160
 161                         uboot: partition@0 {
 162                                 label = "u-boot";
 163                                 reg = <0x000000 0x020000>;
 164                                 read-only;
 165                         };
 166
 167                         partition@20000 {
 168                                 compatible = "tplink,firmware";
 169                                 label = "firmware";
 170                                 reg = <0x020000 0x7d0000>;
 171                         };
 172
 173                         art: partition@7f0000 {
 174                                 label = "art";
 175                                 reg = <0x7f0000 0x010000>;
 176                                 read-only;
 177                         };
 178                 };
 179         };
 180 };
 181
 182 &mdio0 {
 183         status = "okay";
 184
 185         phy0: ethernet-phy@0 {
 186                 reg = <0>;
 187
 188                 qca,ar8327-initvals = <
 189                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 190                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 191                         0x50 0xc737c737 /* LED_CTRL0 */
 192                         0x54 0x00000000 /* LED_CTRL1 */
 193                         0x58 0x00000000 /* LED_CTRL2 */
 194                         0x5c 0x0030c300 /* LED_CTRL3 */
 195                         0x7c 0x0000007e /* PORT0_STATUS */
 196                         0x94 0x0000007e /* PORT6 STATUS */
 197                 >;
 198         };
 199 };
 200
 201 &eth0 {
 202         status = "okay";
 203
 204         mtd-mac-address = <&uboot 0x1fc00>;
 205         mtd-mac-address-increment = <1>;
 206         phy-handle = <&phy0>;
 207         pll-data = <0x56000000 0x00000101 0x00001616>;
 208
 209         gmac-config {
 210                 device = <&gmac>;
 211                 rgmii-enabled = <1>;
 212         };
 213 };
 214
 215 &eth1 {
 216         status = "okay";
 217
 218         mtd-mac-address = <&uboot 0x1fc00>;
 219         pll-data = <0x03000101 0x00000101 0x00001616>;
 220
 221         fixed-link {
 222                 speed = <1000>;
 223                 full-duplex;
 224         };
 225 };
 226
 227 &wmac {
 228         status = "okay";
 229
 230         mtd-cal-data = <&art 0x1000>;
 231         mtd-mac-address = <&uboot 0x1fc00>;
 232         mtd-mac-address-increment = <(-1)>;
 233 };