target/linux/ath79/dts/qca9558_tplink_tl-wr941n-v7-cn.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr941n-v7-cn", "qca,qca9558";
  11         model = "TP-Link TL-WR941N v7 (CN)";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_system;
  19                 led-failsafe = &led_system;
  20                 led-running = &led_system;
  21                 led-upgrade = &led_system;
  22                 label-mac-device = &eth0;
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 led_system: system {
  29                         label = "tp-link:green:system";
  30                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  31                         default-state = "on";
  32                 };
  33
  34                 wlan {
  35                         label = "tp-link:green:wlan";
  36                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  37                         linux,default-trigger = "phy0tpt";
  38                 };
  39
  40                 qss {
  41                         label = "tp-link:green:qss";
  42                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  43                 };
  44         };
  45
  46         keys {
  47                 compatible = "gpio-keys";
  48
  49                 reset {
  50                         label = "reset";
  51                         linux,code = <KEY_RESTART>;
  52                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  53                         debounce-interval = <60>;
  54                 };
  55
  56                 wps {
  57                         label = "qss";
  58                         linux,code = <KEY_WPS_BUTTON>;
  59                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  60                         debounce-interval = <60>;
  61                 };
  62         };
  63 };
  64
  65 &uart {
  66         status = "okay";
  67 };
  68
  69 &spi {
  70         status = "okay";
  71         num-cs = <1>;
  72
  73         flash@0 {
  74                 compatible = "jedec,spi-nor";
  75                 reg = <0>;
  76                 spi-max-frequency = <25000000>;
  77
  78                 partitions {
  79                         compatible = "fixed-partitions";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82
  83                         uboot: partition@0 {
  84                                 label = "u-boot";
  85                                 reg = <0x000000 0x020000>;
  86                                 read-only;
  87                         };
  88
  89                         partition@20000 {
  90                                 compatible = "tplink,firmware";
  91                                 label = "firmware";
  92                                 reg = <0x020000 0x3d0000>;
  93                         };
  94
  95                         art: partition@7f0000 {
  96                                 label = "art";
  97                                 reg = <0x3f0000 0x010000>;
  98                                 read-only;
  99                         };
 100                 };
 101         };
 102 };
 103
 104 &mdio0 {
 105         status = "okay";
 106
 107         switch0@1f {
 108                 compatible = "qca,ar8236";
 109                 reg = <0x1f>;
 110         };
 111 };
 112
 113 &eth0 {
 114         status = "okay";
 115         phy-mode = "mii";
 116         mtd-mac-address = <&uboot 0x1fc00>;
 117         fixed-link {
 118                 speed = <100>;
 119                 full-duplex;
 120         };
 121 };
 122
 123 &wmac {
 124         status = "okay";
 125         mtd-cal-data = <&art 0x1000>;
 126         mtd-mac-address = <&uboot 0x1fc00>;
 127 };