target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "trendnet,tew-823dru", "qca,qca9558";
  11         model = "TRENDNET TEW-823DRU";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power_green;
  19                 led-failsafe = &led_power_green;
  20                 led-running = &led_power_green;
  21                 led-upgrade = &led_power_green;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power_orange {
  28                         label = "trendnet:orange:power";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 led_power_green: power_green {
  33                         label = "trendnet:green:power";
  34                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 planet_green {
  38                         label = "trendnet:green:planet";
  39                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 planet_orange {
  43                         label = "trendnet:orange:planet";
  44                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  45                 };
  46         };
  47
  48         keys {
  49                 compatible = "gpio-keys";
  50
  51                 reset {
  52                         label = "Reset button";
  53                         linux,code = <KEY_RESTART>;
  54                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  55                         debounce-interval = <60>;
  56                 };
  57
  58                 wps {
  59                         label = "WPS button";
  60                         linux,code = <KEY_WPS_BUTTON>;
  61                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  62                         debounce-interval = <60>;
  63                 };
  64         };
  65 };
  66
  67 &pcie0 {
  68         status = "okay";
  69 };
  70
  71 &pcie1 {
  72         status = "okay";
  73 };
  74
  75 &uart {
  76         status = "okay";
  77 };
  78
  79 &gpio {
  80         status = "okay";
  81 };
  82
  83 &usb_phy0 {
  84         status = "okay";
  85 };
  86
  87 &usb0 {
  88         #address-cells = <1>;
  89         #size-cells = <0>;
  90         status = "okay";
  91
  92         hub_port0: port@1 {
  93                 reg = <1>;
  94                 #trigger-source-cells = <0>;
  95         };
  96 };
  97
  98 &usb_phy1 {
  99         status = "okay";
 100 };
 101
 102 &usb1 {
 103         #address-cells = <1>;
 104         #size-cells = <0>;
 105         status = "okay";
 106
 107         hub_port1: port@1 {
 108                 reg = <1>;
 109                 #trigger-source-cells = <0>;
 110         };
 111 };
 112
 113 &spi {
 114         status = "okay";
 115
 116         num-cs = <1>;
 117
 118         flash@0 {
 119                 compatible = "jedec,spi-nor";
 120                 reg = <0>;
 121                 spi-max-frequency = <25000000>;
 122
 123                 partitions {
 124                         compatible = "fixed-partitions";
 125                         #address-cells = <1>;
 126                         #size-cells = <1>;
 127
 128                         partition@0 {
 129                                 label = "u-boot";
 130                                 reg = <0x000000 0x030000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@30000 {
 135                                 label = "nvram";
 136                                 reg = <0x030000 0x010000>;
 137                                 read-only;
 138                         };
 139
 140                         partition@40000 {
 141                                 compatible = "denx,uimage";
 142                                 label = "firmware";
 143                                 reg = <0x040000 0xef0000>;
 144                         };
 145
 146                         partition@f30000 {
 147                                 label = "lang";
 148                                 reg = <0xf30000 0x030000>;
 149                                 read-only;
 150                         };
 151
 152                         partition@f60000 {
 153                                 label = "my-dlink";
 154                                 reg = <0xf60000 0x080000>;
 155                                 read-only;
 156                         };
 157
 158                         partition@fe0000 {
 159                                 label = "mac";
 160                                 reg = <0xfe0000 0x010000>;
 161                                 read-only;
 162                         };
 163
 164                         art: partition@ff0000 {
 165                                 label = "art";
 166                                 reg = <0xff0000 0x010000>;
 167                                 read-only;
 168                         };
 169                 };
 170         };
 171 };
 172
 173 &mdio0 {
 174         status = "okay";
 175
 176         phy0: ethernet-phy@0 {
 177                 reg = <0>;
 178                 qca,ar8327-initvals = <
 179                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 180                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 181                         0x10 0x81000080 /* POWER_ON_STRIP */
 182                         0x7c 0x0000007e /* PORT0_STATUS */
 183                         0x94 0x0000007e /* PORT6 STATUS */
 184                 >;
 185         };
 186 };
 187
 188 &eth0 {
 189         status = "okay";
 190
 191         phy-handle = <&phy0>;
 192         pll-data = <0x56000000 0x00000101 0x00001616>;
 193
 194         gmac-config {
 195                 device = <&gmac>;
 196                 rgmii-enabled = <1>;
 197         };
 198 };
 199
 200 &eth1 {
 201         status = "okay";
 202
 203         pll-data = <0x03000101 0x00000101 0x00001616>;
 204
 205         fixed-link {
 206                 speed = <1000>;
 207                 full-duplex;
 208         };
 209 };
 210
 211 &wmac {
 212         status = "okay";
 213
 214         mtd-cal-data = <&art 0x1000>;
 215 };