target/linux/ath79/dts/qca9561_avm_fritz4020.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "avm,fritz4020", "qca,qca9560";
  11         model = "AVM FRITZ!Box 4020";
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &info_red;
  16                 led-running = &power;
  17                 led-upgrade = &info_red;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200n8";
  22         };
  23
  24         led_spi {
  25                 compatible = "spi-gpio";
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 gpio-sck = <&gpio 20 GPIO_ACTIVE_HIGH>;
  30                 gpio-mosi = <&gpio 19 GPIO_ACTIVE_HIGH>;
  31                 num-chipselects = <0>;
  32
  33                 led_gpio: led_gpio@0 {
  34                         compatible = "fairchild,74hc595";
  35                         reg = <0>;
  36                         gpio-controller;
  37                         #gpio-cells = <2>;
  38                         registers-number = <1>;
  39                         lines-initial-states = /bits/ 8 <0xff>;
  40                         spi-max-frequency = <10000000>;
  41
  42                         gpio_latch_bit {
  43                                 gpio-hog;
  44                                 gpios = <7 GPIO_ACTIVE_HIGH>;
  45                                 output-high;
  46                                 line-name = "gpio-latch-bit";
  47                         };
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53
  54                 power: power {
  55                         label = "fritz4020:green:power";
  56                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  57                         default-state = "on";
  58                 };
  59
  60                 wlan {
  61                         label = "fritz4020:green:wlan";
  62                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  63                         linux,default-trigger = "phy0tpt";
  64                 };
  65
  66                 lan {
  67                         label = "fritz4020:green:lan";
  68                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 wan {
  72                         label = "fritz4020:green:wan";
  73                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 info {
  77                         label = "fritz4020:green:info";
  78                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 info_red: info_red {
  82                         label = "fritz4020:red:info";
  83                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  84                 };
  85         };
  86
  87         keys {
  88                 compatible = "gpio-keys-polled";
  89                 poll-interval = <100>;
  90
  91                 wps_button {
  92                         label = "WPS button";
  93                         linux,code = <KEY_WPS_BUTTON>;
  94                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  95                 };
  96
  97                 wlan_button {
  98                         label = "WLAN button";
  99                         linux,code = <KEY_RFKILL>;
 100                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
 101                 };
 102         };
 103 };
 104
 105 &uart {
 106         status = "okay";
 107 };
 108
 109 &gpio {
 110         status = "okay";
 111 };
 112
 113 &spi {
 114         status = "okay";
 115         num-cs = <1>;
 116
 117         flash@0 {
 118                 compatible = "jedec,spi-nor";
 119                 reg = <0>;
 120                 spi-max-frequency = <25000000>;
 121
 122                 partitions {
 123                         compatible = "fixed-partitions";
 124                         #address-cells = <1>;
 125                         #size-cells = <1>;
 126
 127                         partition@0 {
 128                                 label = "urlader";
 129                                 reg = <0x000000 0x020000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@1 {
 134                                 compatible = "avm,eva-firmware";
 135                                 label = "firmware";
 136                                 reg = <0x020000 0xee0000>;
 137                         };
 138
 139                         partition@2 {
 140                                 label = "tffs (1)";
 141                                 reg = <0xf00000 0x080000>;
 142                                 read-only;
 143                         };
 144
 145                         partition@3 {
 146                                 label = "tffs (2)";
 147                                 reg = <0xf80000 0x080000>;
 148                                 read-only;
 149                         };
 150                 };
 151         };
 152 };
 153
 154 &eth0 {
 155         status = "okay";
 156
 157         phy-mode = "mii";
 158         phy-handle = <&swphy0>;
 159
 160         gmac-config {
 161                 device = <&gmac>;
 162
 163                 switch-phy-addr-swap = <1>;
 164                 switch-phy-swap = <1>;
 165         };
 166 };
 167
 168 &eth1 {
 169         status = "okay";
 170 };
 171
 172 &wmac {
 173         status = "okay";
 174         qca,no-eeprom;
 175 };