target/linux/ath79/dts/qca9561_avm_fritz4020.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "avm,fritz4020", "qca,qca9560";
  11         model = "AVM FRITZ!Box 4020";
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &info_red;
  16                 led-running = &power;
  17                 led-upgrade = &info_red;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200n8";
  22         };
  23
  24         led_spi {
  25                 compatible = "spi-gpio";
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 sck-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  30                 mosi-gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  31                 num-chipselects = <0>;
  32
  33                 led_gpio: led_gpio@0 {
  34                         compatible = "fairchild,74hc595";
  35                         reg = <0>;
  36                         gpio-controller;
  37                         #gpio-cells = <2>;
  38                         registers-number = <1>;
  39                         spi-max-frequency = <10000000>;
  40
  41                         gpio_latch_bit {
  42                                 gpio-hog;
  43                                 gpios = <7 GPIO_ACTIVE_HIGH>;
  44                                 output-high;
  45                                 line-name = "gpio-latch-bit";
  46                         };
  47                 };
  48         };
  49
  50         leds {
  51                 compatible = "gpio-leds";
  52
  53                 power: power {
  54                         label = "fritz4020:green:power";
  55                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  56                         default-state = "on";
  57                 };
  58
  59                 wlan {
  60                         label = "fritz4020:green:wlan";
  61                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  62                         linux,default-trigger = "phy0tpt";
  63                 };
  64
  65                 lan {
  66                         label = "fritz4020:green:lan";
  67                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 wan {
  71                         label = "fritz4020:green:wan";
  72                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 info {
  76                         label = "fritz4020:green:info";
  77                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 info_red: info_red {
  81                         label = "fritz4020:red:info";
  82                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  83                 };
  84         };
  85
  86         keys {
  87                 compatible = "gpio-keys-polled";
  88                 poll-interval = <100>;
  89
  90                 wps_button {
  91                         label = "WPS button";
  92                         linux,code = <KEY_WPS_BUTTON>;
  93                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  94                 };
  95
  96                 wlan_button {
  97                         label = "WLAN button";
  98                         linux,code = <KEY_RFKILL>;
  99                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
 100                 };
 101         };
 102 };
 103
 104 &uart {
 105         status = "okay";
 106 };
 107
 108 &gpio {
 109         status = "okay";
 110 };
 111
 112 &spi {
 113         status = "okay";
 114         num-cs = <1>;
 115
 116         flash@0 {
 117                 compatible = "jedec,spi-nor";
 118                 reg = <0>;
 119                 spi-max-frequency = <25000000>;
 120
 121                 partitions {
 122                         compatible = "fixed-partitions";
 123                         #address-cells = <1>;
 124                         #size-cells = <1>;
 125
 126                         partition@0 {
 127                                 label = "urlader";
 128                                 reg = <0x000000 0x020000>;
 129                                 read-only;
 130                         };
 131
 132                         partition@1 {
 133                                 compatible = "avm,eva-firmware";
 134                                 label = "firmware";
 135                                 reg = <0x020000 0xee0000>;
 136                         };
 137
 138                         partition@2 {
 139                                 label = "tffs (1)";
 140                                 reg = <0xf00000 0x080000>;
 141                                 read-only;
 142                         };
 143
 144                         partition@3 {
 145                                 label = "tffs (2)";
 146                                 reg = <0xf80000 0x080000>;
 147                                 read-only;
 148                         };
 149                 };
 150         };
 151 };
 152
 153 &eth0 {
 154         status = "okay";
 155
 156         phy-mode = "mii";
 157         phy-handle = <&swphy0>;
 158
 159         gmac-config {
 160                 device = <&gmac>;
 161
 162                 switch-phy-addr-swap = <1>;
 163                 switch-phy-swap = <1>;
 164         };
 165 };
 166
 167 &eth1 {
 168         status = "okay";
 169 };
 170
 171 &wmac {
 172         status = "okay";
 173         qca,no-eeprom;
 174 };