target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-c25-v1", "qca,qca9561";
  11         model = "TP-Link Archer C25 v1";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power;
  19                 led-failsafe = &led_power;
  20                 led-running = &led_power;
  21                 led-upgrade = &led_power;
  22                 label-mac-device = &eth0;
  23         };
  24
  25         led_spi {
  26                 compatible = "spi-gpio";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29
  30                 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  31                 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  32                 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  33                 num-chipselects = <1>;
  34
  35                 led_gpio: led_gpio@0 {
  36                         compatible = "fairchild,74hc595";
  37                         reg = <0>;
  38                         gpio-controller;
  39                         #gpio-cells = <2>;
  40                         registers-number = <1>;
  41                         spi-max-frequency = <10000000>;
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys";
  47
  48                 wifi {
  49                         label = "WiFi button";
  50                         linux,code = <KEY_RFKILL>;
  51                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 reset {
  55                         label = "Reset button";
  56                         linux,code = <KEY_RESTART>;
  57                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60
  61         leds {
  62                 compatible = "gpio-leds";
  63
  64                 led_power: power {
  65                         label = "tp-link:green:power";
  66                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  67                         default-state = "on";
  68                 };
  69
  70                 wps {
  71                         label = "tp-link:green:wps";
  72                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 wlan2g {
  76                         label = "tp-link:green:wlan2g";
  77                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  78                         linux,default-trigger = "phy1tpt";
  79                 };
  80
  81                 wlan5g {
  82                         label = "tp-link:green:wlan5g";
  83                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  84                         linux,default-trigger = "phy0tpt";
  85                 };
  86
  87                 wan_green {
  88                         label = "tp-link:green:wan";
  89                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  90                 };
  91
  92                 wan_amber {
  93                         label = "tp-link:amber:wan";
  94                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  95                 };
  96
  97                 lan1 {
  98                         label = "tp-link:green:lan1";
  99                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
 100                 };
 101
 102                 lan2 {
 103                         label = "tp-link:green:lan2";
 104                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 105                 };
 106
 107                 lan3 {
 108                         label = "tp-link:green:lan3";
 109                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 110                 };
 111
 112                 lan4 {
 113                         label = "tp-link:green:lan4";
 114                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
 115                 };
 116         };
 117 };
 118
 119 &spi {
 120         status = "okay";
 121
 122         num-cs = <1>;
 123
 124         flash@0 {
 125                 compatible = "jedec,spi-nor";
 126                 reg = <0>;
 127                 spi-max-frequency = <25000000>;
 128
 129                 partitions {
 130                         compatible = "fixed-partitions";
 131                         #address-cells = <1>;
 132                         #size-cells = <1>;
 133
 134                         partition@0 {
 135                                 label = "factory-boot";
 136                                 reg = <0x000000 0x020000>;
 137                                 read-only;
 138                         };
 139
 140                         partition@20000 {
 141                                 label = "u-boot";
 142                                 reg = <0x020000 0x010000>;
 143                                 read-only;
 144                         };
 145
 146                         partition@30000 {
 147                                 compatible = "denx,uimage";
 148                                 label = "firmware";
 149                                 reg = <0x030000 0x7a0000>;
 150                         };
 151
 152                         config: partition@7d0000 {
 153                                 label = "config";
 154                                 reg = <0x7d0000 0x010000>;
 155                                 read-only;
 156                         };
 157
 158                         info: partition@7e0000 {
 159                                 label = "info";
 160                                 reg = <0x7e0000 0x010000>;
 161                                 read-only;
 162                         };
 163
 164                         art: partition@7f0000 {
 165                                 label = "art";
 166                                 reg = <0x7f0000 0x010000>;
 167                                 read-only;
 168                         };
 169                 };
 170         };
 171 };
 172
 173 &uart {
 174         status = "okay";
 175 };
 176
 177 &pcie {
 178         status = "okay";
 179 };
 180
 181 &eth0 {
 182         status = "okay";
 183
 184         phy-mode = "mii";
 185         phy-handle = <&swphy4>;
 186
 187         mtd-mac-address = <&info 0x8>;
 188 };
 189
 190 &eth1 {
 191         status = "okay";
 192
 193         mtd-mac-address = <&info 0x8>;
 194         mtd-mac-address-increment = <1>;
 195 };
 196
 197 &wmac {
 198         status = "okay";
 199
 200         mtd-cal-data = <&art 0x1000>;
 201         mtd-mac-address = <&info 0x8>;
 202 };