target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca956x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,archer-c25-v1", "qca,qca9561";
  10         model = "TP-Link Archer C25 v1";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &eth0;
  18         };
  19
  20         led_spi {
  21                 compatible = "spi-gpio";
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24
  25                 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  26                 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  27                 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  28                 num-chipselects = <1>;
  29
  30                 led_gpio: led_gpio@0 {
  31                         compatible = "fairchild,74hc595";
  32                         reg = <0>;
  33                         gpio-controller;
  34                         #gpio-cells = <2>;
  35                         registers-number = <1>;
  36                         spi-max-frequency = <10000000>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 wifi {
  44                         label = "WiFi button";
  45                         linux,code = <KEY_RFKILL>;
  46                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 reset {
  50                         label = "Reset button";
  51                         linux,code = <KEY_RESTART>;
  52                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55
  56         leds {
  57                 compatible = "gpio-leds";
  58
  59                 led_power: power {
  60                         label = "green:power";
  61                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  62                         default-state = "on";
  63                 };
  64
  65                 wps {
  66                         label = "green:wps";
  67                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 wlan2g {
  71                         label = "green:wlan2g";
  72                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  73                         linux,default-trigger = "phy1tpt";
  74                 };
  75
  76                 wlan5g {
  77                         label = "green:wlan5g";
  78                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  79                         linux,default-trigger = "phy0tpt";
  80                 };
  81
  82                 wan_green {
  83                         label = "green:wan";
  84                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  85                 };
  86
  87                 wan_amber {
  88                         label = "amber:wan";
  89                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  90                 };
  91
  92                 lan1 {
  93                         label = "green:lan1";
  94                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  95                 };
  96
  97                 lan2 {
  98                         label = "green:lan2";
  99                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 100                 };
 101
 102                 lan3 {
 103                         label = "green:lan3";
 104                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 105                 };
 106
 107                 lan4 {
 108                         label = "green:lan4";
 109                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
 110                 };
 111         };
 112 };
 113
 114 &spi {
 115         status = "okay";
 116
 117         flash@0 {
 118                 compatible = "jedec,spi-nor";
 119                 reg = <0>;
 120                 spi-max-frequency = <25000000>;
 121
 122                 partitions {
 123                         compatible = "fixed-partitions";
 124                         #address-cells = <1>;
 125                         #size-cells = <1>;
 126
 127                         partition@0 {
 128                                 label = "factory-boot";
 129                                 reg = <0x000000 0x020000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@20000 {
 134                                 label = "u-boot";
 135                                 reg = <0x020000 0x010000>;
 136                                 read-only;
 137                         };
 138
 139                         partition@30000 {
 140                                 compatible = "denx,uimage";
 141                                 label = "firmware";
 142                                 reg = <0x030000 0x7a0000>;
 143                         };
 144
 145                         config: partition@7d0000 {
 146                                 label = "config";
 147                                 reg = <0x7d0000 0x010000>;
 148                                 read-only;
 149                         };
 150
 151                         info: partition@7e0000 {
 152                                 label = "info";
 153                                 reg = <0x7e0000 0x010000>;
 154                                 read-only;
 155
 156                                 nvmem-layout {
 157                                         compatible = "fixed-layout";
 158                                         #address-cells = <1>;
 159                                         #size-cells = <1>;
 160
 161                                         macaddr_info_8: macaddr@8 {
 162                                                 compatible = "mac-base";
 163                                                 reg = <0x8 0x6>;
 164                                                 #nvmem-cell-cells = <1>;
 165                                         };
 166                                 };
 167                         };
 168
 169                         art: partition@7f0000 {
 170                                 label = "art";
 171                                 reg = <0x7f0000 0x010000>;
 172                                 read-only;
 173                         };
 174                 };
 175         };
 176 };
 177
 178 &pcie {
 179         status = "okay";
 180 };
 181
 182 &eth0 {
 183         status = "okay";
 184
 185         phy-handle = <&swphy4>;
 186
 187         nvmem-cells = <&macaddr_info_8 0>;
 188         nvmem-cell-names = "mac-address";
 189 };
 190
 191 &eth1 {
 192         status = "okay";
 193
 194         nvmem-cells = <&macaddr_info_8 1>;
 195         nvmem-cell-names = "mac-address";
 196 };
 197
 198 &wmac {
 199         status = "okay";
 200
 201         mtd-cal-data = <&art 0x1000>;
 202         nvmem-cells = <&macaddr_info_8 0>;
 203         nvmem-cell-names = "mac-address";
 204 };