target/linux/ath79/dts/qca9563_nec_wg800hp.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         model = "NEC Aterm WG800HP";
  11         compatible = "nec,wg800hp", "qca,qca9563";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &power_green;
  19                 led-failsafe = &power_red;
  20                 led-running = &power_green;
  21                 led-upgrade = &power_green;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26                 pinctrl-names = "default";
  27                 pinctrl-0 = <&jtag_disable_pins>;
  28
  29                 wlan2g_red {
  30                         label = "wg800hp:red:wlan2g";
  31                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 active_red {
  35                         label = "wg800hp:red:active";
  36                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 active_green {
  40                         label = "wg800hp:green:active";
  41                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 power_red: power_red {
  45                         label = "wg800hp:red:power";
  46                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 power_green: power_green {
  50                         label = "wg800hp:green:power";
  51                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  52                         default-state = "on";
  53                 };
  54
  55                 wlan5g_red {
  56                         label = "wg800hp:red:wlan5g";
  57                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  58                 };
  59
  60                 wlan5g_green {
  61                         label = "wg800hp:green:wlan5g";
  62                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  63                         linux,default-trigger = "phy0tpt";
  64                 };
  65
  66                 wlan2g_green {
  67                         label = "wg800hp:green:wlan2g";
  68                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  69                         linux,default-trigger = "phy1tpt";
  70                 };
  71         };
  72
  73         keys {
  74                 compatible = "gpio-keys";
  75
  76                 br {
  77                         label = "br";
  78                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  79                         linux,code = <BTN_0>;
  80                         linux,input-type = <EV_SW>;
  81                         debounce-interval = <60>;
  82                 };
  83
  84                 reset {
  85                         label = "reset";
  86                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  87                         linux,code = <KEY_RESTART>;
  88                         debounce-interval = <60>;
  89                 };
  90
  91                 wps {
  92                         label = "wps";
  93                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  94                         linux,code = <KEY_WPS_BUTTON>;
  95                         debounce-interval = <60>;
  96                 };
  97         };
  98 };
  99
 100 &spi {
 101         status = "okay";
 102         num-cs = <1>;
 103
 104         flash@0 {
 105                 compatible = "jedec,spi-nor";
 106                 reg = <0>;
 107                 spi-max-frequency = <25000000>;
 108
 109                 partitions {
 110                         compatible = "fixed-partitions";
 111                         #address-cells = <1>;
 112                         #size-cells = <1>;
 113
 114                         partition@0 {
 115                                 label = "u-boot";
 116                                 reg = <0x000000 0x040000>;
 117                                 read-only;
 118                         };
 119
 120                         partition@40000 {
 121                                 label = "u-boot-env";
 122                                 reg = <0x040000 0x010000>;
 123                                 read-only;
 124                         };
 125
 126                         partition@50000 {
 127                                 compatible = "denx,uimage";
 128                                 label = "firmware";
 129                                 reg = <0x050000 0x6f0000>;
 130                         };
 131
 132                         partition@740000 {
 133                                 label = "user_data";
 134                                 reg = <0x740000 0x0a0000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@7e0000 {
 139                                 label = "board_data";
 140                                 reg = <0x7e0000 0x010000>;
 141                                 read-only;
 142                         };
 143
 144                         art: partition@7f0000 {
 145                                 label = "art";
 146                                 reg = <0x7f0000 0x010000>;
 147                                 read-only;
 148                         };
 149                 };
 150         };
 151 };
 152
 153 &mdio0 {
 154         status = "okay";
 155
 156         phy0: ethernet-phy@0 {
 157                 reg = <0>;
 158
 159                 qca,ar8327-initvals = <
 160                         0x04 0x00000080 /* PORT0 PAD MODE CTRL */
 161                         0x50 0xcc35cc35 /* LED_CTRL0 */
 162                         0x54 0xca35ca35 /* LED_CTRL1 */
 163                         0x58 0xc935c935 /* LED_CTRL2 */
 164                         0x5c 0x03ffff00 /* LED_CTRL3 */
 165                         0x7c 0x0000007e /* PORT0_STATUS */
 166                 >;
 167         };
 168 };
 169
 170 &eth0 {
 171         status = "okay";
 172
 173         phy-mode = "sgmii";
 174         phy-handle = <&phy0>;
 175 };
 176
 177 &pcie {
 178         status = "okay";
 179 };
 180
 181 &uart {
 182         status = "okay";
 183 };
 184
 185 &wmac {
 186         status = "okay";
 187         qca,no-eeprom;
 188 };