target/linux/ath79/dts/qca9563_nec_wg800hp.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca956x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         model = "NEC Aterm WG800HP";
  10         compatible = "nec,wg800hp", "qca,qca9563";
  11
  12         aliases {
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_red;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_green;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21                 pinctrl-names = "default";
  22                 pinctrl-0 = <&jtag_disable_pins>;
  23
  24                 wlan2g_red {
  25                         label = "red:wlan2g";
  26                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 active_red {
  30                         label = "red:active";
  31                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 active_green {
  35                         label = "green:active";
  36                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 led_power_red: power_red {
  40                         label = "red:power";
  41                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 led_power_green: power_green {
  45                         label = "green:power";
  46                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  47                         default-state = "on";
  48                 };
  49
  50                 wlan5g_red {
  51                         label = "red:wlan5g";
  52                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  53                 };
  54
  55                 wlan5g_green {
  56                         label = "green:wlan5g";
  57                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  58                         linux,default-trigger = "phy0tpt";
  59                 };
  60
  61                 wlan2g_green {
  62                         label = "green:wlan2g";
  63                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  64                         linux,default-trigger = "phy1tpt";
  65                 };
  66         };
  67
  68         keys {
  69                 compatible = "gpio-keys";
  70
  71                 br {
  72                         label = "br";
  73                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  74                         linux,code = <BTN_0>;
  75                         linux,input-type = <EV_SW>;
  76                         debounce-interval = <60>;
  77                 };
  78
  79                 reset {
  80                         label = "reset";
  81                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_RESTART>;
  83                         debounce-interval = <60>;
  84                 };
  85
  86                 wps {
  87                         label = "wps";
  88                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  89                         linux,code = <KEY_WPS_BUTTON>;
  90                         debounce-interval = <60>;
  91                 };
  92         };
  93 };
  94
  95 &spi {
  96         status = "okay";
  97
  98         flash@0 {
  99                 compatible = "jedec,spi-nor";
 100                 reg = <0>;
 101                 spi-max-frequency = <25000000>;
 102
 103                 partitions {
 104                         compatible = "fixed-partitions";
 105                         #address-cells = <1>;
 106                         #size-cells = <1>;
 107
 108                         partition@0 {
 109                                 label = "u-boot";
 110                                 reg = <0x000000 0x040000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@40000 {
 115                                 label = "u-boot-env";
 116                                 reg = <0x040000 0x010000>;
 117                                 read-only;
 118                         };
 119
 120                         partition@50000 {
 121                                 compatible = "denx,uimage";
 122                                 label = "firmware";
 123                                 reg = <0x050000 0x6f0000>;
 124                         };
 125
 126                         partition@740000 {
 127                                 label = "user_data";
 128                                 reg = <0x740000 0x0a0000>;
 129                                 read-only;
 130                         };
 131
 132                         partition@7e0000 {
 133                                 label = "board_data";
 134                                 reg = <0x7e0000 0x010000>;
 135                                 read-only;
 136                         };
 137
 138                         art: partition@7f0000 {
 139                                 label = "art";
 140                                 reg = <0x7f0000 0x010000>;
 141                                 read-only;
 142                         };
 143                 };
 144         };
 145 };
 146
 147 &mdio0 {
 148         status = "okay";
 149
 150         phy0: ethernet-phy@0 {
 151                 reg = <0>;
 152
 153                 qca,ar8327-initvals = <
 154                         0x04 0x00000080 /* PORT0 PAD MODE CTRL */
 155                         0x50 0xcc35cc35 /* LED_CTRL0 */
 156                         0x54 0xca35ca35 /* LED_CTRL1 */
 157                         0x58 0xc935c935 /* LED_CTRL2 */
 158                         0x5c 0x03ffff00 /* LED_CTRL3 */
 159                         0x7c 0x0000007e /* PORT0_STATUS */
 160                 >;
 161         };
 162 };
 163
 164 &eth0 {
 165         status = "okay";
 166
 167         phy-mode = "sgmii";
 168         phy-handle = <&phy0>;
 169 };
 170
 171 &pcie {
 172         status = "okay";
 173 };
 174
 175 &uart {
 176         status = "okay";
 177 };
 178
 179 &wmac {
 180         status = "okay";
 181         qca,no-eeprom;
 182 };