target/linux/ath79/dts/qca9563_tplink_archer-c6-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca9563_tplink_archer-x6-v2.dtsi"
   4
   5 / {
   6         compatible = "tplink,archer-c6-v2", "qca,qca9563";
   7         model = "TP-Link Archer C6 v2 (EU/RU/JP)";
   8
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_power: power {
  20                         label = "green:power";
  21                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  22                         default-state = "on";
  23                 };
  24
  25                 wlan2g {
  26                         label = "green:wlan2g";
  27                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  28                         linux,default-trigger = "phy1tpt";
  29                 };
  30
  31                 wlan5g {
  32                         label = "green:wlan5g";
  33                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  34                         linux,default-trigger = "phy0tpt";
  35                 };
  36
  37                 lan {
  38                         label = "green:lan";
  39                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 wan {
  43                         label = "green:wan";
  44                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 wan_fail {
  48                         label = "amber:wan";
  49                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wps {
  53                         label = "green:wps";
  54                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57
  58         keys {
  59                 compatible = "gpio-keys";
  60
  61                 reset {
  62                         label = "Reset button";
  63                         linux,code = <KEY_RESTART>;
  64                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  65                         debounce-interval = <60>;
  66                 };
  67
  68                 wps {
  69                         label = "WPS button";
  70                         linux,code = <KEY_WPS_BUTTON>;
  71                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  72                         debounce-interval = <60>;
  73                 };
  74         };
  75 };
  76
  77 &spi {
  78         status = "okay";
  79
  80         num-cs = <1>;
  81
  82         flash@0 {
  83                 compatible = "jedec,spi-nor";
  84                 reg = <0>;
  85                 spi-max-frequency = <25000000>;
  86
  87                 partitions {
  88                         compatible = "fixed-partitions";
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91
  92                         partition@0 {
  93                                 label = "u-boot";
  94                                 reg = <0x000000 0x020000>;
  95                                 read-only;
  96                         };
  97
  98                         info: partition@20000 {
  99                                 label = "info";
 100                                 reg = <0x020000 0x010000>;
 101                                 read-only;
 102                         };
 103
 104                         partition@30000 {
 105                                 compatible = "denx,uimage";
 106                                 label = "firmware";
 107                                 reg = <0x030000 0x7a0000>;
 108                         };
 109
 110                         partition@7d0000 {
 111                                 label = "tplink";
 112                                 reg = <0x7d0000 0x020000>;
 113                                 read-only;
 114                         };
 115
 116                         art: partition@7f0000 {
 117                                 label = "art";
 118                                 reg = <0x7f0000 0x010000>;
 119                                 read-only;
 120                         };
 121                 };
 122         };
 123 };