target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &power;
  16                 led-failsafe = &power;
  17                 led-running = &power;
  18                 led-upgrade = &power;
  19                 label-mac-device = &eth0;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 power: power {
  26                         label = "tp-link:green:power";
  27                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  28                         default-state = "on";
  29                 };
  30
  31                 wlan2g {
  32                         label = "tp-link:green:wlan2g";
  33                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  34                         linux,default-trigger = "phy1tpt";
  35                 };
  36
  37                 wlan5g {
  38                         label = "tp-link:green:wlan5g";
  39                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "phy0tpt";
  41                 };
  42
  43                 lan {
  44                         label = "tp-link:green:lan";
  45                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wan {
  49                         label = "tp-link:green:wan";
  50                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wan_fail {
  54                         label = "tp-link:amber:wan";
  55                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 wps {
  59                         label = "tp-link:green:wps";
  60                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         keys {
  65                 compatible = "gpio-keys";
  66
  67                 reset {
  68                         label = "Reset button";
  69                         linux,code = <KEY_RESTART>;
  70                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  71                         debounce-interval = <60>;
  72                 };
  73
  74                 wps {
  75                         label = "WPS button";
  76                         linux,code = <KEY_WPS_BUTTON>;
  77                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  78                         debounce-interval = <60>;
  79                 };
  80         };
  81 };
  82
  83 &pcie {
  84         status = "okay";
  85 };
  86
  87 &uart {
  88         status = "okay";
  89 };
  90
  91 &gpio {
  92         status = "okay";
  93 };
  94
  95 &spi {
  96         status = "okay";
  97         num-cs = <1>;
  98
  99         flash@0 {
 100                 compatible = "jedec,spi-nor";
 101                 reg = <0>;
 102                 spi-max-frequency = <25000000>;
 103
 104                 partitions {
 105                         compatible = "fixed-partitions";
 106                         #address-cells = <1>;
 107                         #size-cells = <1>;
 108
 109                         partition@0 {
 110                                 label = "u-boot";
 111                                 reg = <0x000000 0x020000>;
 112                                 read-only;
 113                         };
 114
 115                         mac: partition@20000 {
 116                                 label = "mac";
 117                                 reg = <0x020000 0x010000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@30000 {
 122                                 compatible = "denx,uimage";
 123                                 label = "firmware";
 124                                 reg = <0x030000 0x7a0000>;
 125                         };
 126
 127                         partition@7d0000 {
 128                                 label = "tplink";
 129                                 reg = <0x7d0000 0x020000>;
 130                                 read-only;
 131                         };
 132
 133                         art: partition@7f0000 {
 134                                 label = "art";
 135                                 reg = <0x7f0000 0x010000>;
 136                                 read-only;
 137                         };
 138                 };
 139         };
 140 };
 141
 142 &mdio0 {
 143         status = "okay";
 144
 145         phy-mask = <0>;
 146
 147         phy0: ethernet-phy@0 {
 148                 reg = <0>;
 149                 phy-mode = "sgmii";
 150                 qca,mib-poll-interval = <500>;
 151
 152                 qca,ar8327-initvals = <
 153                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 154                         0x7c 0x0000007e /* PORT0_STATUS */
 155                         >;
 156         };
 157 };
 158
 159 &eth0 {
 160         status = "okay";
 161
 162         phy-mode = "sgmii";
 163         mtd-mac-address = <&mac 0x8>;
 164         phy-handle = <&phy0>;
 165 };
 166
 167 &wmac {
 168         status = "okay";
 169
 170         mtd-cal-data = <&art 0x1000>;
 171         mtd-mac-address = <&mac 0x8>;
 172 };