target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &led_power;
  16                 led-failsafe = &led_power;
  17                 led-running = &led_power;
  18                 led-upgrade = &led_power;
  19                 label-mac-device = &eth0;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 led_power: power {
  26                         label = "tp-link:green:power";
  27                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  28                         default-state = "on";
  29                 };
  30
  31                 wlan2g {
  32                         label = "tp-link:green:wlan2g";
  33                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  34                         linux,default-trigger = "phy1tpt";
  35                 };
  36
  37                 wlan5g {
  38                         label = "tp-link:green:wlan5g";
  39                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "phy0tpt";
  41                 };
  42
  43                 lan {
  44                         label = "tp-link:green:lan";
  45                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wan {
  49                         label = "tp-link:green:wan";
  50                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wan_fail {
  54                         label = "tp-link:amber:wan";
  55                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 wps {
  59                         label = "tp-link:green:wps";
  60                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         keys {
  65                 compatible = "gpio-keys";
  66
  67                 reset {
  68                         label = "Reset button";
  69                         linux,code = <KEY_RESTART>;
  70                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  71                         debounce-interval = <60>;
  72                 };
  73
  74                 wps {
  75                         label = "WPS button";
  76                         linux,code = <KEY_WPS_BUTTON>;
  77                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  78                         debounce-interval = <60>;
  79                 };
  80         };
  81 };
  82
  83 &pcie {
  84         status = "okay";
  85 };
  86
  87 &uart {
  88         status = "okay";
  89 };
  90
  91 &gpio {
  92         status = "okay";
  93 };
  94
  95 &spi {
  96         status = "okay";
  97
  98         num-cs = <1>;
  99
 100         flash@0 {
 101                 compatible = "jedec,spi-nor";
 102                 reg = <0>;
 103                 spi-max-frequency = <25000000>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         partition@0 {
 111                                 label = "u-boot";
 112                                 reg = <0x000000 0x020000>;
 113                                 read-only;
 114                         };
 115
 116                         mac: partition@20000 {
 117                                 label = "mac";
 118                                 reg = <0x020000 0x010000>;
 119                                 read-only;
 120                         };
 121
 122                         partition@30000 {
 123                                 compatible = "denx,uimage";
 124                                 label = "firmware";
 125                                 reg = <0x030000 0x7a0000>;
 126                         };
 127
 128                         partition@7d0000 {
 129                                 label = "tplink";
 130                                 reg = <0x7d0000 0x020000>;
 131                                 read-only;
 132                         };
 133
 134                         art: partition@7f0000 {
 135                                 label = "art";
 136                                 reg = <0x7f0000 0x010000>;
 137                                 read-only;
 138                         };
 139                 };
 140         };
 141 };
 142
 143 &mdio0 {
 144         status = "okay";
 145
 146         phy-mask = <0>;
 147
 148         phy0: ethernet-phy@0 {
 149                 reg = <0>;
 150                 phy-mode = "sgmii";
 151                 qca,mib-poll-interval = <500>;
 152
 153                 qca,ar8327-initvals = <
 154                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 155                         0x7c 0x0000007e /* PORT0_STATUS */
 156                         >;
 157         };
 158 };
 159
 160 &eth0 {
 161         status = "okay";
 162
 163         phy-mode = "sgmii";
 164         mtd-mac-address = <&mac 0x8>;
 165         phy-handle = <&phy0>;
 166 };
 167
 168 &wmac {
 169         status = "okay";
 170
 171         mtd-cal-data = <&art 0x1000>;
 172         mtd-mac-address = <&mac 0x8>;
 173 };