target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-status = &system;
  16         };
  17
  18         gpio_leds: leds {
  19                 compatible = "gpio-leds";
  20
  21                 system: system {
  22                         label = "tp-link:green:system";
  23                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  24                         default-state = "on";
  25                 };
  26
  27                 led_wlan2g: wlan2g {
  28                         label = "tp-link:green:wlan2g";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                         linux,default-trigger = "phy1tpt";
  31                 };
  32
  33                 usb {
  34                         label = "tp-link:green:usb";
  35                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  36                         trigger-sources = <&hub_port0>;
  37                         linux,default-trigger = "usbport";
  38                 };
  39         };
  40
  41         gpio_keys: keys {
  42                 compatible = "gpio-keys";
  43
  44                 reset {
  45                         label = "Reset button";
  46                         linux,code = <KEY_RESTART>;
  47                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  48                         debounce-interval = <60>;
  49                 };
  50
  51                 wps {
  52                         label = "WPS button";
  53                         linux,code = <KEY_WPS_BUTTON>;
  54                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  55                         debounce-interval = <60>;
  56                 };
  57         };
  58
  59         gpio-export {
  60                 compatible = "gpio-export";
  61
  62                 gpio_usb_power {
  63                         gpio-export,name = "tp-link:power:usb";
  64                         gpio-export,output = <1>;
  65                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  66                 };
  67         };
  68 };
  69
  70 &pcie {
  71         status = "okay";
  72 };
  73
  74 &uart {
  75         status = "okay";
  76 };
  77
  78 &gpio {
  79         status = "okay";
  80 };
  81
  82 &usb_phy0 {
  83         status = "okay";
  84 };
  85
  86 &usb0 {
  87         #address-cells = <1>;
  88         #size-cells = <0>;
  89         status = "okay";
  90
  91         hub_port0: port@1 {
  92                 reg = <1>;
  93                 #trigger-source-cells = <0>;
  94         };
  95 };
  96
  97 &gpio_leds {
  98         wlan5g {
  99                 label = "tp-link:green:wlan5g";
 100                 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 101                 linux,default-trigger = "phy0tpt";
 102         };
 103
 104         wan {
 105                 label = "tp-link:green:wan";
 106                 gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
 107         };
 108
 109         wan_fail {
 110                 label = "tp-link:orange:wan";
 111                 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 112         };
 113
 114         lan1 {
 115                 label = "tp-link:green:lan1";
 116                 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 117         };
 118
 119         lan2 {
 120                 label = "tp-link:green:lan2";
 121                 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
 122         };
 123
 124         lan3 {
 125                 label = "tp-link:green:lan3";
 126                 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 127         };
 128
 129         lan4 {
 130                 label = "tp-link:green:lan4";
 131                 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 132         };
 133
 134         wps {
 135                 label = "tp-link:green:wps";
 136                 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 137         };
 138 };
 139
 140 &spi {
 141         status = "okay";
 142         num-cs = <1>;
 143
 144         flash@0 {
 145                 compatible = "jedec,spi-nor";
 146                 reg = <0>;
 147                 spi-max-frequency = <25000000>;
 148
 149                 mtdparts: partitions {
 150                         compatible = "fixed-partitions";
 151                         #address-cells = <1>;
 152                         #size-cells = <1>;
 153                 };
 154         };
 155 };
 156
 157 &mdio0 {
 158         status = "okay";
 159
 160         phy-mask = <0>;
 161
 162         phy0: ethernet-phy@0 {
 163                 reg = <0>;
 164                 phy-mode = "sgmii";
 165
 166                 qca,ar8327-initvals = <
 167                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 168                         0x10 0x81000080 /* POWER_ON_STRIP */
 169                         0x50 0xcc35cc35 /* LED_CTRL0 */
 170                         0x54 0xcb37cb37 /* LED_CTRL1 */
 171                         0x58 0x00000000 /* LED_CTRL2 */
 172                         0x5c 0x00f3cf00 /* LED_CTRL3 */
 173                         0x7c 0x0000007e /* PORT0_STATUS */
 174                         >;
 175         };
 176 };
 177
 178 &eth0 {
 179         status = "okay";
 180
 181         pll-data = <0x03000101 0x00000101 0x00001919>;
 182
 183         phy-mode = "sgmii";
 184         mtd-mac-address = <&info 0x8>;
 185         phy-handle = <&phy0>;
 186 };
 187
 188 &wmac {
 189         status = "okay";
 190         mtd-cal-data = <&art 0x1000>;
 191         mtd-mac-address = <&info 0x8>;
 192 };