target/linux/ath79/dts/qca9563_tplink_tl-re450-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,re450-v2", "qca,qca9563";
  11         model = "TP-Link RE450 v2";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-status = &system;
  19                 mdio-gpio0 = &mdio2;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 system: power {
  26                         label = "tp-link:blue:power";
  27                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 wlan2g {
  31                         label = "tp-link:blue:wlan2g";
  32                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  33                         default-state = "off";
  34                         linux,default-trigger = "phy1tpt";
  35                 };
  36
  37                 wlan5g {
  38                         label = "tp-link:blue:wlan5g";
  39                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  40                         default-state = "off";
  41                         linux,default-trigger = "phy0tpt";
  42                 };
  43
  44                 lan_link {
  45                         label = "tp-link:green:lan_link";
  46                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  47                         default-state = "off";
  48                 };
  49
  50                 lan_data {
  51                         label = "tp-link:green:lan_data";
  52                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  53                         default-state = "off";
  54                 };
  55
  56                 wps_blue {
  57                         label = "tp-link:blue:wps";
  58                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  59                         default-state = "off";
  60                 };
  61
  62                 wps_red {
  63                         label = "tp-link:red:wps";
  64                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  65                         default-state = "off";
  66                 };
  67         };
  68
  69         keys {
  70                 compatible = "gpio-keys";
  71
  72                 reset {
  73                         label = "Reset button";
  74                         linux,code = <KEY_RESTART>;
  75                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  76                         debounce-interval = <60>;
  77                 };
  78
  79                 power {
  80                         label = "Power button";
  81                         linux,code = <KEY_POWER>;
  82                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  83                         debounce-interval = <60>;
  84                 };
  85
  86                 leds {
  87                         label = "LED control button";
  88                         linux,code = <BTN_0>;
  89                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  90                         debounce-interval = <60>;
  91                 };
  92
  93                 wps {
  94                         label = "WPS button";
  95                         linux,code = <KEY_WPS_BUTTON>;
  96                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  97                         debounce-interval = <60>;
  98                 };
  99         };
 100
 101         mdio2: mdio {
 102                 compatible = "virtual,mdio-gpio";
 103
 104                 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
 105                         <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
 106                 #address-cells = <1>;
 107                 #size-cells = <0>;
 108
 109                 phy0: ethernet-phy@4 {
 110                         reg = <4>;
 111                         device_type = "ethernet-phy";
 112                         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 113                 };
 114         };
 115 };
 116
 117 &pcie {
 118         status = "okay";
 119 };
 120
 121 &uart {
 122         status = "okay";
 123 };
 124
 125 &gpio {
 126         status = "okay";
 127 };
 128
 129 &spi {
 130         status = "okay";
 131         num-cs = <1>;
 132
 133         flash@0 {
 134                 compatible = "jedec,spi-nor";
 135                 reg = <0>;
 136                 spi-max-frequency = <25000000>;
 137
 138                 partitions {
 139                         compatible = "fixed-partitions";
 140                         #address-cells = <1>;
 141                         #size-cells = <1>;
 142
 143                         partition@0 {
 144                                 label = "u-boot";
 145                                 reg = <0x000000 0x020000>;
 146                                 read-only;
 147                         };
 148
 149                         partition@20000 {
 150                                 label = "firmware";
 151                                 reg = <0x020000 0x5e0000>;
 152                         };
 153
 154                         partition@600000 {
 155                                 label = "partition-table";
 156                                 reg = <0x600000 0x010000>;
 157                                 read-only;
 158                         };
 159
 160                         info: partition@610000 {
 161                                 label = "product-info";
 162                                 reg = <0x610000 0x020000>;
 163                                 read-only;
 164                         };
 165
 166                         partition@630000 {
 167                                 label = "config";
 168                                 reg = <0x630000 0x020000>;
 169                                 read-only;
 170                         };
 171
 172                         art: partition@7f0000 {
 173                                 label = "art";
 174                                 reg = <0x7f0000 0x010000>;
 175                                 read-only;
 176                         };
 177                 };
 178         };
 179 };
 180
 181 &eth0 {
 182         status = "okay";
 183         mtd-mac-address = <&info 0x8>;
 184         phy-handle = <&phy0>;
 185 };
 186
 187 &wmac {
 188         status = "okay";
 189         mtd-cal-data = <&art 0x1000>;
 190         mtd-mac-address = <&info 0x8>;
 191 };