target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &system;
  16                 led-failsafe = &system;
  17                 led-running = &system;
  18                 led-upgrade = &system;
  19         };
  20
  21         gpio_leds: leds {
  22                 compatible = "gpio-leds";
  23
  24                 system: system {
  25                         label = "tp-link:green:system";
  26                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  27                         linux,default-trigger = "heartbeat";
  28                 };
  29
  30                 wifi_green {
  31                         label = "tp-link:green:wlan";
  32                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  33                         default-state = "off";
  34                         linux,default-trigger = "phy0tpt";
  35                 };
  36
  37                 wifi_wps {
  38                         label = "tp-link:green:wps";
  39                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  40                         default-state = "off";
  41                 };
  42
  43                 wan {
  44                         label = "tp-link:green:wan";
  45                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  46                         default-state = "off";
  47                 };
  48
  49                 wan_fail {
  50                         label = "tp-link:orange:wan";
  51                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  52                         default-state = "off";
  53                 };
  54
  55                 lan1 {
  56                         label = "tp-link:green:lan1";
  57                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  58                         default-state = "off";
  59                 };
  60
  61                 lan2 {
  62                         label = "tp-link:green:lan2";
  63                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  64                         default-state = "off";
  65                 };
  66
  67                 lan3 {
  68                         label = "tp-link:green:lan3";
  69                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  70                         default-state = "off";
  71                 };
  72
  73                 lan4 {
  74                         label = "tp-link:green:lan4";
  75                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  76                         default-state = "off";
  77                 };
  78         };
  79
  80         keys {
  81                 compatible = "gpio-keys";
  82
  83                 reset {
  84                         label = "Reset button";
  85                         linux,code = <KEY_RESTART>;
  86                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  87                         debounce-interval = <60>;
  88                 };
  89
  90                 wifi {
  91                         label = "RFKILL button";
  92                         linux,code = <KEY_RFKILL>;
  93                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  94                         debounce-interval = <60>;
  95                 };
  96         };
  97
  98         gpio-export {
  99                 compatible = "gpio-export";
 100                 #size-cells = <0>;
 101
 102                 gpio_usb_power {
 103                         gpio-export,name = "tp-link:power:usb";
 104                         gpio-export,output = <1>;
 105                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 106                 };
 107         };
 108 };
 109
 110 &uart {
 111         status = "okay";
 112 };
 113
 114 &gpio {
 115         status = "okay";
 116 };
 117
 118 &spi {
 119         status = "okay";
 120         num-cs = <1>;
 121
 122         flash@0 {
 123                 compatible = "jedec,spi-nor";
 124                 reg = <0>;
 125                 spi-max-frequency = <25000000>;
 126
 127                 partitions {
 128                         compatible = "fixed-partitions";
 129                         #address-cells = <1>;
 130                         #size-cells = <1>;
 131
 132                         partition@0 {
 133                                 label = "u-boot";
 134                                 reg = <0x000000 0x020000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@20000 {
 139                                 compatible = "tplink,firmware";
 140                                 label = "firmware";
 141                                 reg = <0x020000 0xf30000>;
 142                         };
 143
 144                         info: partition@f50000 {
 145                                 label = "product-info";
 146                                 reg = <0xf50000 0x020000>;
 147                                 read-only;
 148                         };
 149
 150                         partition@f70000 {
 151                                 label = "config";
 152                                 reg = <0xf70000 0x050000>;
 153                                 read-only;
 154                         };
 155
 156                         partition@fc0000 {
 157                                 label = "partition-table";
 158                                 reg = <0xfc0000 0x010000>;
 159                                 read-only;
 160                         };
 161
 162                         partition@fd0000 {
 163                                 label = "logs";
 164                                 reg = <0xfd0000 0x020000>;
 165                                 read-only;
 166                         };
 167
 168                         art: partition@ff0000 {
 169                                 label = "ART";
 170                                 reg = <0xff0000 0x010000>;
 171                                 read-only;
 172                         };
 173                 };
 174         };
 175 };
 176
 177 &mdio0 {
 178         status = "okay";
 179
 180         phy-mask = <0>;
 181         phy0: ethernet-phy@0 {
 182                 reg = <0>;
 183                 phy-mode = "sgmii";
 184
 185                 qca,ar8327-initvals = <
 186                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 187                         0x7c 0x0000007e /* PORT0_STATUS */
 188                 >;
 189         };
 190 };
 191
 192 &eth0 {
 193         status = "okay";
 194
 195         mtd-mac-address = <&info 0x8>;
 196         phy-mode = "sgmii";
 197         phy-handle = <&phy0>;
 198 };
 199
 200 &wmac {
 201         status = "okay";
 202         mtd-cal-data = <&art 0x1000>;
 203         mtd-mac-address = <&info 0x8>;
 204 };