target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "qca9563_tplink_tl-wr1043n.dtsi"
   5
   6 / {
   7         compatible = "tplink,tl-wr1043nd-v4", "qca,qca9563";
   8         model = "TP-Link TL-WR1043ND v4";
   9
  10         gpio-export {
  11                 compatible = "gpio-export";
  12                 #size-cells = <0>;
  13
  14                 gpio_usb_power {
  15                         gpio-export,name = "tp-link:power:usb";
  16                         gpio-export,output = <1>;
  17                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  18                 };
  19         };
  20 };
  21
  22 &spi {
  23         status = "okay";
  24         num-cs = <1>;
  25
  26         flash@0 {
  27                 compatible = "jedec,spi-nor";
  28                 reg = <0>;
  29                 spi-max-frequency = <25000000>;
  30
  31                 partitions {
  32                         compatible = "fixed-partitions";
  33                         #address-cells = <1>;
  34                         #size-cells = <1>;
  35
  36                         partition@0 {
  37                                 label = "u-boot";
  38                                 reg = <0x000000 0x020000>;
  39                                 read-only;
  40                         };
  41
  42                         partition@20000 {
  43                                 compatible = "tplink,firmware";
  44                                 label = "firmware";
  45                                 reg = <0x020000 0xf30000>;
  46                         };
  47
  48                         info: partition@f50000 {
  49                                 label = "info";
  50                                 reg = <0xf50000 0x020000>;
  51                                 read-only;
  52                         };
  53
  54                         partition@f70000 {
  55                                 label = "config";
  56                                 reg = <0xf70000 0x050000>;
  57                                 read-only;
  58                         };
  59
  60                         partition@fc0000 {
  61                                 label = "partition-table";
  62                                 reg = <0xfc0000 0x010000>;
  63                                 read-only;
  64                         };
  65
  66                         partition@fd0000 {
  67                                 label = "logs";
  68                                 reg = <0xfd0000 0x020000>;
  69                                 read-only;
  70                         };
  71
  72                         art: partition@ff0000 {
  73                                 label = "art";
  74                                 reg = <0xff0000 0x010000>;
  75                                 read-only;
  76                         };
  77                 };
  78         };
  79 };
  80
  81 &gpio_leds {
  82         usb {
  83                 label = "tp-link:green:usb";
  84                 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  85                 trigger-sources = <&hub_port0>;
  86                 linux,default-trigger = "usbport";
  87         };
  88 };
  89
  90 &usb_phy0 {
  91         status = "okay";
  92 };
  93
  94 &usb0 {
  95         #address-cells = <1>;
  96         #size-cells = <0>;
  97         status = "okay";
  98
  99         hub_port0: port@1 {
 100                 reg = <1>;
 101                 #trigger-source-cells = <0>;
 102         };
 103 };