target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 label-mac-device = &wmac;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys";
  20
  21                 wifi_button {
  22                         label = "WiFi button";
  23                         linux,code = <KEY_RFKILL>;
  24                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 reset_button {
  28                         label = "Reset button";
  29                         linux,code = <KEY_RESTART>;
  30                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  31                 };
  32         };
  33 };
  34
  35 &spi {
  36         status = "okay";
  37         num-cs = <1>;
  38
  39         flash@0 {
  40                 compatible = "jedec,spi-nor";
  41                 reg = <0>;
  42                 spi-max-frequency = <25000000>;
  43
  44                 partitions {
  45                         compatible = "fixed-partitions";
  46                         #address-cells = <1>;
  47                         #size-cells = <1>;
  48
  49                         uboot:  partition@0 {
  50                                 label = "u-boot";
  51                                 reg = <0x000000 0x020000>;
  52                                 read-only;
  53                         };
  54
  55                         partition@20000 {
  56                                 compatible = "tplink,firmware";
  57                                 label = "firmware";
  58                                 reg = <0x020000 0x3d0000>;
  59                         };
  60
  61                         art: partition@3f0000 {
  62                                 label = "art";
  63                                 reg = <0x3f0000 0x010000>;
  64                                 read-only;
  65                         };
  66                 };
  67         };
  68 };
  69
  70 &uart {
  71         status = "okay";
  72 };
  73
  74 &eth0 {
  75         status = "okay";
  76
  77         phy-mode = "mii";
  78         phy-handle = <&swphy4>;
  79
  80         mtd-mac-address = <&uboot 0x1fc00>;
  81         mtd-mac-address-increment = <1>;
  82 };
  83
  84 &eth1 {
  85         status = "okay";
  86 };
  87
  88 &wmac {
  89         status = "okay";
  90
  91         mtd-cal-data = <&art 0x1000>;
  92         mtd-mac-address = <&uboot 0x1fc00>;
  93 };