target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6 . /lib/functions/k2t.sh
   7
   8 board=$(board_name)
   9
  10 case "$FIRMWARE" in
  11 "ath10k/cal-pci-0000:00:00.0.bin")
  12         case $board in
  13         comfast,cf-wr650ac-v1|\
  14         comfast,cf-wr650ac-v2|\
  15         devolo,magic-2-wifi|\
  16         ubnt,unifiac-lite|\
  17         ubnt,unifiac-lr|\
  18         ubnt,unifiac-mesh|\
  19         ubnt,unifiac-mesh-pro|\
  20         ubnt,lap-120|\
  21         ubnt,litebeam-ac-gen2|\
  22         ubnt,nanobeam-ac|\
  23         ubnt,nanostation-ac|\
  24         ubnt,nanostation-ac-loco|\
  25         ubnt,unifiac-pro|\
  26         yuncore,a770)
  27                 caldata_extract "art" 0x5000 0x844
  28                 ;;
  29         devolo,dvl1200e|\
  30         devolo,dvl1200i|\
  31         devolo,dvl1750c|\
  32         devolo,dvl1750e|\
  33         devolo,dvl1750i|\
  34         devolo,dvl1750x)
  35                 caldata_extract "art" 0x5000 0x844
  36                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
  37                 ;;
  38         dlink,dir-859-a1)
  39                 caldata_extract "art" 0x5000 0x844
  40                 ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
  41                 ;;
  42         elecom,wrc-1750ghbk2-i)
  43                 caldata_extract "art" 0x5000 0x844
  44                 ;;
  45         engenius,ecb1750)
  46                 caldata_extract "art" 0x5000 0x844
  47                 ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
  48                 ;;
  49         engenius,epg5000|\
  50         iodata,wn-ac1167dgr|\
  51         iodata,wn-ac1600dgr2|\
  52         sitecom,wlr-7100)
  53                 caldata_extract "art" 0x5000 0x844
  54                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
  55                 ;;
  56         engenius,ews511ap)
  57                 caldata_extract "art" 0x5000 0x844
  58                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
  59                 ;;
  60         glinet,gl-ar750)
  61                 caldata_extract "art" 0x5000 0x844
  62                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
  63                 ;;
  64         glinet,gl-x750)
  65                 caldata_extract "art" 0x5000 0x844
  66                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
  67                 ;;
  68         nec,wg800hp)
  69                 caldata_extract "art" 0x5000 0x844
  70                 ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
  71                 ;;
  72         ocedo,koala|\
  73         ocedo,ursus)
  74                 caldata_extract "art" 0x5000 0x844
  75                 ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
  76                 ;;
  77         openmesh,om5p-ac-v2)
  78                 caldata_extract "art" 0x5000 0x844
  79                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
  80                 ;;
  81         qihoo,c301)
  82                 caldata_extract "radiocfg" 0x5000 0x844
  83                 ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
  84                 ;;
  85         tplink,archer-a7-v5|\
  86         tplink,archer-c2-v3|\
  87         tplink,archer-c7-v4|\
  88         tplink,archer-c7-v5|\
  89         tplink,archer-c25-v1)
  90                 caldata_extract "art" 0x5000 0x844
  91                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
  92                 ;;
  93         tplink,archer-c5-v1|\
  94         tplink,archer-c7-v2)
  95                 caldata_extract "art" 0x5000 0x844
  96                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
  97                 ;;
  98         tplink,archer-d50-v1)
  99                 caldata_extract "art" 0x5000 0x844
 100                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
 101                 ;;
 102         tplink,archer-d7-v1|\
 103         tplink,archer-d7b-v1)
 104                 caldata_extract "art" 0x5000 0x844
 105                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) +2)
 106                 ;;
 107         tplink,re350k-v1)
 108                 caldata_extract "art" 0x5000 0x844
 109                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
 110                 ;;
 111         tplink,re355-v1|\
 112         tplink,re450-v1)
 113                 caldata_extract "art" 0x5000 0x844
 114                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 115                 ;;
 116         tplink,re450-v2)
 117                 caldata_extract "art" 0x5000 0x844
 118                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
 119                 ;;
 120         tplink,tl-wr902ac-v1)
 121                 caldata_extract "art" 0x5000 0x844
 122                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary tplink 0x8) -1)
 123                 ;;
 124         esac
 125         ;;
 126 "ath10k/cal-pci-0000:01:00.0.bin")
 127         case $board in
 128         sitecom,wlr-8100)
 129                 caldata_extract "art" 0x5000 0x844
 130                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
 131                 ;;
 132         esac
 133         ;;
 134 "ath10k/pre-cal-pci-0000:00:00.0.bin")
 135         case $board in
 136         comfast,cf-e313ac)
 137                 caldata_extract "art" 0x5000 0x2f20
 138                 ath10k_patch_mac $(mtd_get_mac_binary art 0x6)
 139                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 140                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 141                 rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
 142                 ;;
 143         comfast,cf-e560ac)
 144                 caldata_extract "art" 0x5000 0x2f20
 145                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
 146                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 147                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 148                 rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
 149                 ;;
 150         dlink,dir-842-c1|\
 151         dlink,dir-842-c2|\
 152         dlink,dir-842-c3|\
 153         nec,wg1200cr)
 154                 caldata_extract "art" 0x5000 0x2f20
 155                 ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
 156                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 157                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 158                 ;;
 159         netgear,ex6400|\
 160         netgear,ex7300)
 161                 caldata_extract "caldata" 0x5000 0x2f20
 162                 ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
 163                 ;;
 164         phicomm,k2t)
 165                 caldata_extract "art" 0x5000 0x2f20
 166                 ath10k_patch_mac $(k2t_get_mac "5g_mac")
 167                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 168                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 169                 ;;
 170         tplink,archer-c58-v1|\
 171         tplink,archer-c59-v1|\
 172         tplink,archer-c59-v2|\
 173         tplink,archer-c60-v1|\
 174         tplink,archer-c60-v2|\
 175         tplink,archer-c60-v3|\
 176         tplink,archer-c6-v2|\
 177         tplink,archer-c6-v2-us)
 178                 caldata_extract "art" 0x5000 0x2f20
 179                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
 180                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 181                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 182                 ;;
 183         yuncore,a782|\
 184         yuncore,xd4200)
 185                 caldata_extract "art" 0x5000 0x2f20
 186                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 187                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 188                 ;;
 189         esac
 190         ;;
 191 *)
 192         exit 1
 193         ;;
 194 esac