target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

   1 #!/bin/ash
   2
   3 [ "$ACTION" = "add" ] || exit 0
   4
   5 PHYNBR=${DEVPATH##*/phy}
   6
   7 [ -n $PHYNBR ] || exit 0
   8
   9 . /lib/functions.sh
  10 . /lib/functions/system.sh
  11 . /lib/functions/k2t.sh
  12
  13 board=$(board_name)
  14
  15 case "$board" in
  16         adtran,bsap1800-v2|\
  17         adtran,bsap1840)
  18                 macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
  19                 ;;
  20         dlink,dap-1330-a1|\
  21         dlink,dap-1365-a1|\
  22         dlink,dch-g020-a1)
  23                 mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress
  24                 ;;
  25         dlink,dap-2660-a1)
  26                 [ "$PHYNBR" -eq 1 ] && \
  27                         mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
  28                 ;;
  29         iodata,wn-ac1600dgr)
  30                 # There is no eeprom data for 5 GHz wlan in "art" partition
  31                 # which would allow to patch the macaddress
  32                 [ "$PHYNBR" -eq 0 ] && \
  33                         macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
  34                 ;;
  35         iodata,wn-ag300dgr)
  36                 # There is no eeprom data for 5 GHz wlan in "art" partition
  37                 # which would allow to patch the macaddress
  38                 [ "$PHYNBR" -eq 1 ] && \
  39                         macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
  40                 ;;
  41         phicomm,k2t)
  42                 # The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address
  43                 [ "$PHYNBR" -eq 1 ] && \
  44                         k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress
  45                 ;;
  46         siemens,ws-ap3610)
  47                 mtd_get_mac_ascii cfg1 RADIOADDR${PHYNBR} > /sys${DEVPATH}/macaddress
  48                 ;;
  49         trendnet,tew-823dru)
  50                 # set the 2.4G interface mac address to LAN MAC
  51                 [ "$PHYNBR" -eq 1 ] && \
  52                         mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress
  53                 # set the 5G interface mac address to WAN MAC + 1
  54                 [ "$PHYNBR" -eq 0 ] && \
  55                         macaddr_add "$(mtd_get_mac_text mac 0x18)" 1 > /sys${DEVPATH}/macaddress
  56                 ;;
  57         zyxel,nbg6616)
  58                 # Set mac address for 2.4g device
  59                 [ "$PHYNBR" -eq 1 ] && \
  60                         mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress
  61                 ;;
  62 esac