target/linux/ath79/image/nand.mk

   1 define Build/dongwon-header
   2         head -c 4 $@ > $@.tmp
   3         head -c 8 /dev/zero >> $@.tmp
   4         tail -c +9 $@ >> $@.tmp
   5         ( \
   6                 header_crc="$$(head -c 68 $@.tmp | gzip -c | \
   7                         tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
   8                 printf "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
   9                         dd of=$@.tmp bs=4 count=1 seek=1 conv=notrunc \
  10         )
  11         mv $@.tmp $@
  12 endef
  13
  14 # attention: only zlib compression is allowed for the boot fs
  15 define Build/zyxel-buildkerneljffs
  16         mkdir -p $@.tmp/boot
  17         cp $@ $@.tmp/boot/vmlinux.lzma.uImage
  18         $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
  19                 --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
  20                 -o $@ \
  21                 -d $@.tmp
  22         rm -rf $@.tmp
  23 endef
  24
  25 define Build/zyxel-factory
  26         let \
  27                 maxsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \
  28                 let size="$$(stat -c%s $@)"; \
  29                 if [ $$size -lt $$maxsize ]; then \
  30                         $(STAGING_DIR_HOST)/bin/mkrasimage \
  31                                 -b $(RAS_BOARD) \
  32                                 -v $(RAS_VERSION) \
  33                                 -r $@ \
  34                                 -s $$maxsize \
  35                                 -o $@.new \
  36                                 -l 131072 \
  37                         && mv $@.new $@ ; \
  38                 fi
  39 endef
  40
  41 define Device/8dev_rambutan
  42   SOC := qca9557
  43   DEVICE_VENDOR := 8devices
  44   DEVICE_MODEL := Rambutan
  45   DEVICE_PACKAGES := kmod-usb2
  46   BLOCKSIZE := 128k
  47   PAGESIZE := 2048
  48   KERNEL_SIZE := 4096k
  49   KERNEL_IN_UBI := 1
  50   IMAGES := factory.bin sysupgrade.tar
  51   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
  52   IMAGE/factory.bin := append-ubi
  53 endef
  54 TARGET_DEVICES += 8dev_rambutan
  55
  56 define Device/aerohive_hiveap-121
  57   SOC := ar9344
  58   DEVICE_VENDOR := Aerohive
  59   DEVICE_MODEL := HiveAP 121
  60   DEVICE_PACKAGES := kmod-usb2
  61   BLOCKSIZE := 128k
  62   PAGESIZE := 2048
  63   IMAGE_SIZE := 116m
  64   KERNEL_SIZE := 5120k
  65   UBINIZE_OPTS := -E 5
  66   SUPPORTED_DEVICES += hiveap-121
  67   IMAGES += factory.bin
  68   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
  69         check-size
  70   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  71 endef
  72 TARGET_DEVICES += aerohive_hiveap-121
  73
  74 define Device/domywifi_dw33d
  75   SOC := qca9558
  76   DEVICE_VENDOR := DomyWifi
  77   DEVICE_MODEL := DW33D
  78   DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport \
  79         kmod-ath10k-ct ath10k-firmware-qca988x-ct
  80   KERNEL_SIZE := 5120k
  81   IMAGE_SIZE := 98304k
  82   BLOCKSIZE := 128k
  83   PAGESIZE := 2048
  84   UBINIZE_OPTS := -E 5
  85   IMAGES += factory.bin
  86   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  87   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
  88         check-size
  89 endef
  90 TARGET_DEVICES += domywifi_dw33d
  91
  92 define Device/dongwon_dw02-412h
  93   SOC := qca9557
  94   DEVICE_VENDOR := Dongwon T&I
  95   DEVICE_MODEL := DW02-412H
  96   DEVICE_ALT0_VENDOR := KT
  97   DEVICE_ALT0_MODEL := GiGA WiFi home
  98   DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
  99   KERNEL_SIZE := 8192k
 100   BLOCKSIZE := 128k
 101   PAGESIZE := 2048
 102   KERNEL := $$(KERNEL) | dongwon-header
 103   KERNEL_INITRAMFS := $$(KERNEL)
 104   UBINIZE_OPTS := -E 5
 105   IMAGES += factory.img
 106   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 107         check-size
 108   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 109 endef
 110
 111 define Device/dongwon_dw02-412h-64m
 112   $(Device/dongwon_dw02-412h)
 113   DEVICE_VARIANT := (64M)
 114   DEVICE_ALT0_VARIANT := (64M)
 115   IMAGE_SIZE := 49152k
 116 endef
 117 TARGET_DEVICES += dongwon_dw02-412h-64m
 118
 119 define Device/dongwon_dw02-412h-128m
 120   $(Device/dongwon_dw02-412h)
 121   DEVICE_VARIANT := (128M)
 122   DEVICE_ALT0_VARIANT := (128M)
 123   IMAGE_SIZE := 114688k
 124 endef
 125 TARGET_DEVICES += dongwon_dw02-412h-128m
 126
 127 define Device/glinet_gl-ar300m-common-nand
 128   SOC := qca9531
 129   DEVICE_VENDOR := GL.iNet
 130   DEVICE_MODEL := GL-AR300M
 131   DEVICE_PACKAGES := kmod-usb2
 132   KERNEL_SIZE := 4096k
 133   IMAGE_SIZE := 16000k
 134   PAGESIZE := 2048
 135   VID_HDR_OFFSET := 2048
 136 endef
 137
 138 define Device/glinet_gl-ar300m-nand
 139   $(Device/glinet_gl-ar300m-common-nand)
 140   DEVICE_VARIANT := NAND
 141   BLOCKSIZE := 128k
 142   IMAGES += factory.img
 143   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 144   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 145   SUPPORTED_DEVICES += glinet,gl-ar300m-nor
 146 endef
 147 TARGET_DEVICES += glinet_gl-ar300m-nand
 148
 149 define Device/glinet_gl-ar300m-nor
 150   $(Device/glinet_gl-ar300m-common-nand)
 151   DEVICE_VARIANT := NOR
 152   SUPPORTED_DEVICES += glinet,gl-ar300m-nand gl-ar300m
 153 endef
 154 TARGET_DEVICES += glinet_gl-ar300m-nor
 155
 156 define Device/glinet_gl-ar750s-common
 157   SOC := qca9563
 158   DEVICE_VENDOR := GL.iNet
 159   DEVICE_MODEL := GL-AR750S
 160   DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 \
 161         kmod-usb-storage block-mount
 162   IMAGE_SIZE := 16000k
 163 endef
 164
 165 define Device/glinet_gl-ar750s-nor-nand
 166   $(Device/glinet_gl-ar750s-common)
 167   DEVICE_VARIANT := NOR/NAND
 168   KERNEL_SIZE := 4096k
 169   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 170   SUPPORTED_DEVICES += glinet,gl-ar750s-nor
 171 endef
 172 TARGET_DEVICES += glinet_gl-ar750s-nor-nand
 173
 174 define Device/glinet_gl-ar750s-nor
 175   $(Device/glinet_gl-ar750s-common)
 176   DEVICE_VARIANT := NOR
 177   SUPPORTED_DEVICES += gl-ar750s glinet,gl-ar750s glinet,gl-ar750s-nor-nand
 178 endef
 179 TARGET_DEVICES += glinet_gl-ar750s-nor
 180
 181 define Device/glinet_gl-e750
 182   SOC := qca9531
 183   DEVICE_VENDOR := GL.iNet
 184   DEVICE_MODEL := GL-E750
 185   DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2
 186   SUPPORTED_DEVICES += gl-e750
 187   KERNEL_SIZE := 4096k
 188   IMAGE_SIZE := 131072k
 189   PAGESIZE := 2048
 190   VID_HDR_OFFSET := 2048
 191   BLOCKSIZE := 128k
 192   IMAGES += factory.img
 193   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 194   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 195 endef
 196 TARGET_DEVICES += glinet_gl-e750
 197
 198 define Device/glinet_gl-xe300
 199   SOC := qca9531
 200   DEVICE_VENDOR := GL.iNet
 201   DEVICE_MODEL := GL-XE300
 202   DEVICE_PACKAGES := kmod-usb2 block-mount kmod-usb-serial-ch341 \
 203         kmod-usb-net-qmi-wwan uqmi
 204   KERNEL_SIZE := 4096k
 205   IMAGE_SIZE := 131072k
 206   PAGESIZE := 2048
 207   VID_HDR_OFFSET := 2048
 208   BLOCKSIZE := 128k
 209   IMAGES += factory.img
 210   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 211   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 212 endef
 213 TARGET_DEVICES += glinet_gl-xe300
 214
 215 define Device/linksys_ea4500-v3
 216   SOC := qca9558
 217   DEVICE_VENDOR := Linksys
 218   DEVICE_MODEL := EA4500
 219   DEVICE_VARIANT := v3
 220   DEVICE_PACKAGES := kmod-usb2
 221   BLOCKSIZE := 128k
 222   PAGESIZE := 2048
 223   KERNEL_SIZE := 4096k
 224   IMAGE_SIZE := 81920k
 225   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 226   LINKSYS_HWNAME := EA4500V3
 227   IMAGES += factory.img
 228   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
 229         append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
 230   UBINIZE_OPTS := -E 5
 231 endef
 232 TARGET_DEVICES += linksys_ea4500-v3
 233
 234 # fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + 0xff)
 235 define Device/netgear_ath79_nand
 236   DEVICE_VENDOR := NETGEAR
 237   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
 238   KERNEL_SIZE := 4096k
 239   BLOCKSIZE := 128k
 240   PAGESIZE := 2048
 241   IMAGE_SIZE := 25600k
 242   KERNEL := kernel-bin | append-dtb | lzma -d20 | \
 243         pad-offset $$(KERNEL_SIZE) 129 | uImage lzma | \
 244         append-string -e '\xff' | \
 245         append-uImage-fakehdr filesystem $$(UIMAGE_MAGIC)
 246   KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | uImage lzma
 247   IMAGES := sysupgrade.bin factory.img
 248   IMAGE/factory.img := append-kernel | append-ubi | netgear-dni | \
 249         check-size
 250   IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
 251   UBINIZE_OPTS := -E 5
 252 endef
 253
 254 define Device/netgear_r6100
 255   SOC := ar9344
 256   DEVICE_MODEL := R6100
 257   UIMAGE_MAGIC := 0x36303030
 258   NETGEAR_BOARD_ID := R6100
 259   NETGEAR_HW_ID := 29764434+0+128+128+2x2+2x2
 260   $(Device/netgear_ath79_nand)
 261   DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
 262 endef
 263 TARGET_DEVICES += netgear_r6100
 264
 265 define Device/netgear_wndr3700-v4
 266   SOC := ar9344
 267   DEVICE_MODEL := WNDR3700
 268   DEVICE_VARIANT := v4
 269   UIMAGE_MAGIC := 0x33373033
 270   NETGEAR_BOARD_ID := WNDR3700v4
 271   NETGEAR_HW_ID := 29763948+128+128
 272   $(Device/netgear_ath79_nand)
 273 endef
 274 TARGET_DEVICES += netgear_wndr3700-v4
 275
 276 define Device/netgear_wndr4300
 277   SOC := ar9344
 278   DEVICE_MODEL := WNDR4300
 279   UIMAGE_MAGIC := 0x33373033
 280   NETGEAR_BOARD_ID := WNDR4300
 281   NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
 282   $(Device/netgear_ath79_nand)
 283 endef
 284 TARGET_DEVICES += netgear_wndr4300
 285
 286 define Device/netgear_wndr4300sw
 287   SOC := ar9344
 288   DEVICE_MODEL := WNDR4300SW
 289   UIMAGE_MAGIC := 0x33373033
 290   NETGEAR_BOARD_ID := WNDR4300SW
 291   NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
 292   $(Device/netgear_ath79_nand)
 293 endef
 294 TARGET_DEVICES += netgear_wndr4300sw
 295
 296 define Device/netgear_wndr4300tn
 297   SOC := ar9344
 298   DEVICE_MODEL := WNDR4300TN
 299   UIMAGE_MAGIC := 0x33373033
 300   NETGEAR_BOARD_ID := WNDR4300TN
 301   NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
 302   $(Device/netgear_ath79_nand)
 303 endef
 304 TARGET_DEVICES += netgear_wndr4300tn
 305
 306 define Device/netgear_wndr4300-v2
 307   SOC := qca9563
 308   DEVICE_MODEL := WNDR4300
 309   DEVICE_VARIANT := v2
 310   UIMAGE_MAGIC := 0x27051956
 311   NETGEAR_BOARD_ID := WNDR4500series
 312   NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012175
 313   $(Device/netgear_ath79_nand)
 314 endef
 315 TARGET_DEVICES += netgear_wndr4300-v2
 316
 317 define Device/netgear_wndr4500-v3
 318   SOC := qca9563
 319   DEVICE_MODEL := WNDR4500
 320   DEVICE_VARIANT := v3
 321   UIMAGE_MAGIC := 0x27051956
 322   NETGEAR_BOARD_ID := WNDR4500series
 323   NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012173
 324   $(Device/netgear_ath79_nand)
 325 endef
 326 TARGET_DEVICES += netgear_wndr4500-v3
 327
 328 define Device/zte_mf28x_common
 329   SOC := qca9563
 330   DEVICE_VENDOR := ZTE
 331   DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct
 332   BLOCKSIZE := 128k
 333   PAGESIZE := 2048
 334   KERNEL_SIZE := 4096k
 335   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 336 endef
 337
 338 define Device/zte_mf281
 339   $(Device/zte_mf28x_common)
 340   DEVICE_MODEL := MF281
 341   KERNEL_SIZE := 6144k
 342   IMAGE_SIZE := 29696k
 343   IMAGES += factory.bin
 344   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 345         check-size
 346   DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis \
 347         kmod-usb-acm comgt-ncm
 348 endef
 349 TARGET_DEVICES += zte_mf281
 350
 351 define Device/zte_mf286
 352   $(Device/zte_mf28x_common)
 353   DEVICE_MODEL := MF286
 354   DEVICE_PACKAGES += ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan \
 355         kmod-usb-serial-option uqmi
 356 endef
 357 TARGET_DEVICES += zte_mf286
 358
 359 define Device/zte_mf286a
 360   $(Device/zte_mf28x_common)
 361   DEVICE_MODEL := MF286A
 362   DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan \
 363         kmod-usb-serial-option uqmi
 364 endef
 365 TARGET_DEVICES += zte_mf286a
 366
 367 define Device/zte_mf286r
 368   $(Device/zte_mf28x_common)
 369   DEVICE_MODEL := MF286R
 370   DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis kmod-usb-acm \
 371         comgt-ncm
 372 endef
 373 TARGET_DEVICES += zte_mf286r
 374
 375 define Device/zyxel_nbg6716
 376   SOC := qca9558
 377   DEVICE_VENDOR := ZyXEL
 378   DEVICE_MODEL := NBG6716
 379   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \
 380         ath10k-firmware-qca988x-ct
 381   RAS_BOARD := NBG6716
 382   RAS_ROOTFS_SIZE := 29696k
 383   RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)"
 384   KERNEL_SIZE := 4096k
 385   BLOCKSIZE := 128k
 386   PAGESIZE := 2048
 387   LOADER_TYPE := bin
 388   KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | uImage none | \
 389         zyxel-buildkerneljffs | check-size 4096k
 390   IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
 391   IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | \
 392         sysupgrade-tar rootfs=$$$$@ | append-metadata
 393   IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | \
 394         pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
 395   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 396         zyxel-factory
 397   UBINIZE_OPTS := -E 5
 398 endef
 399 TARGET_DEVICES += zyxel_nbg6716
 400
 401 define Device/zyxel_emg2926_q10a
 402   $(Device/zyxel_nbg6716)
 403   DEVICE_MODEL := EMG2926-Q10A
 404   RAS_BOARD := AAVK-EMG2926Q10A
 405 endef
 406 TARGET_DEVICES += zyxel_emg2926_q10a