target/linux/bcm53xx/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults-new.sh
   7
   8 board_config_update
   9
  10 board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1)
  11 case "$board" in
  12 asus,rt-ac87u)
  13         ifname=eth1
  14         ;;
  15 netgear,r8000)
  16         ifname=eth2
  17         ;;
  18 *)
  19         ifname=eth0
  20         ;;
  21 esac
  22
  23 # Workaround for devices using eth2
  24 case "$board" in
  25 netgear,r8000)
  26         ifname=eth0
  27         ;;
  28 esac
  29
  30 ucidef_set_interface_loopback
  31
  32 # Workaround for devices using CPU port 8 (connected to eth2)
  33 case "$board" in
  34 netgear,r8000)
  35         ucidef_add_switch "switch0" \
  36                 "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
  37         board_config_flush
  38         exit 0
  39         ;;
  40 esac
  41
  42 # NVRAM entries may contain unsorted ports, e.g. Netgear R6250 uses
  43 # vlan1ports=3 2 1 0 5*
  44 # vlan2ports=4 5u
  45 # and early Netgear R8000 was using
  46 # vlan1ports=3 2 1 0 5 7 8*
  47 vlan1ports="$(echo $(nvram get vlan1ports | tr " " "\n" | sort))"
  48 vlan2ports="$(echo $(nvram get vlan2ports | tr " " "\n" | sort))"
  49 if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \
  50    echo "$vlan2ports" | egrep -q "^0 5"; then
  51         ucidef_add_switch "switch0" \
  52                 "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5t@$ifname"
  53 elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \
  54      echo "$vlan2ports" | egrep -q "^0 7"; then
  55         ucidef_add_switch "switch0" \
  56                 "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "7t@$ifname"
  57 elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \
  58      echo "$vlan2ports" | egrep -q "^4 8"; then
  59         ucidef_add_switch "switch0" \
  60                 "0:lan" "1:lan" "2:lan" "3:lan" "5:lan" "7:lan" "4:wan" "8t@$ifname"
  61 else
  62         ucidef_add_switch "switch0" \
  63                 "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
  64 fi
  65
  66 board_config_flush
  67
  68 exit 0