target/linux/bcm53xx/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7
   8 board_config_update
   9
  10 board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1)
  11 case "$board" in
  12 asus,rt-ac87u)
  13         ifname=eth1
  14         ;;
  15 dlink,dir-885l | \
  16 netgear,r7900 | \
  17 netgear,r8000 | \
  18 netgear,r8500)
  19
  20         ifname=eth2
  21         ;;
  22 *)
  23         ifname=eth0
  24         ;;
  25 esac
  26
  27 # Workaround for devices using eth2 connected to (CPU) switch port 8
  28 case "$board" in
  29 dlink,dir-885l | \
  30 netgear,r7900 | \
  31 netgear,r8000 | \
  32 netgear,r8500)
  33         ifname=eth0
  34         ucidef_add_switch "switch0" \
  35                 "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
  36         board_config_flush
  37         exit 0
  38         ;;
  39 esac
  40
  41 # NVRAM entries may contain unsorted ports, e.g. Netgear R6250 uses
  42 # vlan1ports=3 2 1 0 5*
  43 # vlan2ports=4 5u
  44 # and early Netgear R8000 was using
  45 # vlan1ports=3 2 1 0 5 7 8*
  46 vlan1ports="$(echo $(nvram get vlan1ports | tr " " "\n" | sort))"
  47 vlan2ports="$(echo $(nvram get vlan2ports | tr " " "\n" | sort))"
  48 if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \
  49    echo "$vlan2ports" | egrep -q "^0 5"; then
  50         ucidef_add_switch "switch0" \
  51                 "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5t@$ifname"
  52 elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \
  53      echo "$vlan2ports" | egrep -q "^0 7"; then
  54         ucidef_add_switch "switch0" \
  55                 "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "7t@$ifname"
  56 elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \
  57      echo "$vlan2ports" | egrep -q "^4 8"; then
  58         ucidef_add_switch "switch0" \
  59                 "0:lan" "1:lan" "2:lan" "3:lan" "5:lan" "7:lan" "4:wan" "8t@$ifname"
  60 else
  61         ucidef_add_switch "switch0" \
  62                 "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
  63 fi
  64
  65 board_config_flush
  66
  67 exit 0