target/linux/bcm53xx/patches-4.14/315-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch

   1 ---
   2  arch/arm/boot/dts/Makefile                      |  1 +
   3  arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 41 +++++++++++++++++++++++++
   4  2 files changed, 42 insertions(+)
   5  create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
   6
   7 --- a/arch/arm/boot/dts/Makefile
   8 +++ b/arch/arm/boot/dts/Makefile
   9 @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  10         bcm4708-asus-rt-ac68u.dtb \
  11         bcm4708-buffalo-wzr-1750dhp.dtb \
  12         bcm4708-linksys-ea6300-v1.dtb \
  13 +       bcm4708-linksys-ea6500-v2.dtb \
  14         bcm4708-luxul-xap-1510.dtb \
  15         bcm4708-luxul-xwc-1000.dtb \
  16         bcm4708-netgear-r6250.dtb \
  17 --- /dev/null
  18 +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
  19 @@ -0,0 +1,45 @@
  20 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  21 +/*
  22 + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
  23 + * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
  24 + *
  25 + */
  26 +
  27 +/dts-v1/;
  28 +
  29 +#include "bcm4708.dtsi"
  30 +#include "bcm5301x-nand-cs0-bch8.dtsi"
  31 +
  32 +/ {
  33 +       compatible = "linksys,ea6500-v2", "brcm,bcm4708";
  34 +       model = "Linksys EA6500 V2";
  35 +
  36 +       chosen {
  37 +               bootargs = "console=ttyS0,115200";
  38 +       };
  39 +
  40 +       memory {
  41 +               reg = <0x00000000 0x08000000>;
  42 +       };
  43 +
  44 +       gpio-keys {
  45 +               compatible = "gpio-keys";
  46 +               #address-cells = <1>;
  47 +               #size-cells = <0>;
  48 +
  49 +               wps {
  50 +                       label = "WPS";
  51 +                       linux,code = <KEY_WPS_BUTTON>;
  52 +                       gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
  53 +               };
  54 +
  55 +               restart {
  56 +                       label = "Reset";
  57 +                       linux,code = <KEY_RESTART>;
  58 +                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
  59 +               };
  60 +       };
  61 +};
  62 +&usb3_phy {
  63 +       status = "okay";
  64 +};