target/linux/bcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts

   1 /dts-v1/;
   2
   3 #include "bcm6318.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "D-Link DSL-2750B/DSL-2751 rev D1";
   9         compatible = "d-link,dsl-275xb-d1", "brcm,bcm6318";
  10
  11         aliases {
  12                 led-boot = &led_power_green;
  13                 led-failsafe = &led_power_green;
  14                 led-running = &led_power_green;
  15                 led-upgrade = &led_power_green;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 wifi {
  30                         label = "wifi";
  31                         gpios = <&pinctrl 2 1>;
  32                         linux,code = <KEY_WLAN>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 wps {
  37                         label = "wps";
  38                         gpios = <&pinctrl 33 1>;
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                         debounce-interval = <60>;
  41                 };
  42
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&pinctrl 34 1>;
  46                         linux,code = <KEY_RESTART>;
  47                         debounce-interval = <60>;
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53
  54                 led_power_green: power_green {
  55                         label = "dsl-275xb:green:power";
  56                         gpios = <&pinctrl 3 1>;
  57                         default-state = "on";
  58                 };
  59
  60                 inet_green {
  61                         label = "dsl-275xb:green:inet";
  62                         gpios = <&pinctrl 8 1>;
  63                 };
  64
  65                 inet_red {
  66                         label = "dsl-275xb:red:inet-fail";
  67                         gpios = <&pinctrl 9 1>;
  68                 };
  69
  70                 power_red {
  71                         label = "dsl-275xb:red:post-failed";
  72                         gpios = <&pinctrl 11 1>;
  73                 };
  74
  75                 wps_blue {
  76                         label = "dsl-275xb:blue:wps";
  77                         gpios = <&pinctrl 16 1>;
  78                 };
  79
  80                 dsl_green {
  81                         label = "dsl-275xb:green:dsl";
  82                         gpios = <&pinctrl 17 1>;
  83                 };
  84
  85                 usb_green {
  86                         /* not user controllable? */
  87                         label = "dsl-275xb:green:usb";
  88                         gpios = <&pinctrl 49 1>;
  89                 };
  90         };
  91 };
  92
  93 &hsspi {
  94         status = "ok";
  95
  96         flash@0 {
  97                 compatible = "jedec,spi-nor";
  98                 spi-max-frequency = <62500000>;
  99                 spi-tx-bus-width = <2>;
 100                 spi-rx-bus-width = <2>;
 101                 reg = <0>;
 102
 103                 #address-cells = <1>;
 104                 #size-cells = <1>;
 105
 106                 partitions {
 107                         compatible = "fixed-partitions";
 108                         #address-cells = <1>;
 109                         #size-cells = <1>;
 110
 111                         cfe@0 {
 112                                 reg = <0x000000 0x010000>;
 113                                 label = "cfe";
 114                                 read-only;
 115                         };
 116
 117                         linux@10000 {
 118                                 reg = <0x010000 0x7e0000>;
 119                                 label = "linux";
 120                                 compatible = "brcm,bcm963xx-imagetag";
 121                         };
 122
 123                         nvram@7f0000 {
 124                                 reg = <0x7f0000 0x010000>;
 125                                 label = "nvram";
 126                         };
 127                 };
 128         };
 129 };
 130
 131 &pinctrl {
 132         pinctrl-names = "default";
 133
 134         pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
 135                      &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
 136 };
 137
 138 &uart0 {
 139         status = "ok";
 140 };