target/linux/bcm63xx/dts/bcm6328-adb-a4001n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ADB P.DG A4001N";
   9         compatible = "adb,a4001n", "brcm,bcm6328";
  10
  11         aliases {
  12                 led-boot = &led_power_green;
  13                 led-failsafe = &led_power_green;
  14                 led-running = &led_power_green;
  15                 led-upgrade = &led_power_green;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&pinctrl 23 1>;
  32                         linux,code = <KEY_RESTART>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 wps {
  37                         label = "wps";
  38                         gpios = <&pinctrl 24 1>;
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 inet_red {
  48                         label = "A4001N:red:inet";
  49                         gpios = <&pinctrl 1 0>;
  50                 };
  51                 power_red {
  52                         label = "A4001N:red:power";
  53                         gpios = <&pinctrl 4 0>;
  54                 };
  55                 led_power_green: power_green {
  56                         label = "A4001N:green:power";
  57                         gpios = <&pinctrl 8 0>;
  58                         default-state = "on";
  59                 };
  60                 usb_green {
  61                         label = "A4001N:green:usb";
  62                         gpios = <&pinctrl 10 1>;
  63                 };
  64                 dsl_green {
  65                         label = "A4001N:green:dsl";
  66                         gpios = <&pinctrl 11 1>;
  67                 };
  68         };
  69 };
  70
  71 &hsspi {
  72         status = "ok";
  73
  74         flash@0 {
  75                 compatible = "jedec,spi-nor";
  76                 spi-max-frequency = <16666667>;
  77                 spi-tx-bus-width = <2>;
  78                 spi-rx-bus-width = <2>;
  79                 reg = <0>;
  80
  81                 partitions {
  82                         compatible = "fixed-partitions";
  83                         #address-cells = <1>;
  84                         #size-cells = <1>;
  85
  86                         cfe@0 {
  87                                 reg = <0x000000 0x010000>;
  88                                 label = "cfe";
  89                                 read-only;
  90                         };
  91
  92                         linux@10000 {
  93                                 reg = <0x010000 0x7e0000>;
  94                                 label = "linux";
  95                                 compatible = "brcm,bcm963xx-imagetag";
  96                         };
  97
  98                         nvram@7f0000 {
  99                                 reg = <0x7f0000 0x010000>;
 100                                 label = "nvram";
 101                         };
 102                 };
 103         };
 104 };
 105
 106 &uart0 {
 107         status = "ok";
 108 };